[Openswan Users] Fwd: problem of openswan
Samir Hussain
shussain at xelerance.com
Thu Nov 14 12:05:00 EST 2019
Rescued from spam bucket. Please be sure to subscribe to the mailing
list before you post on it.
In terms of the log, I do not see it in the email. Could you provide a
link to a Github gist or pastebin of it?
With respect to your ipsec.conf is there a strong reason why you are
using KLIP? We would recommend using netkey instead. Also, we would
recommend using a tunnel instead of a transport for the type of connection.
Finally I am assuming you have upped the connection manually?
-------- Forwarded Message --------
Subject: problem of openswan
Date: Thu, 14 Nov 2019 13:55:33 +0800 (CST)
From: 闫奥博 <yabxingzi at 163.com>
To: users at lists.openswan.org
Hi,
I use my ubuntu server (no problem).Port openswan on the arm board, but
it cannot start. The following is the log of the arm board.
/etc/ipsec.conf
Looking forward to your reply
--------------------------------------------------------------------------------------
version 2.0
config setup
nat_traversal=yes
virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12
oe=off
protostack=KLIP
plutoopts="--interface=eth0"
conn L2TP-PSK-noNAT
authby=secret
pfs=no
auto=add
keyingtries=3
dpddelay=30
dpdtimeout=120
dpdaction=clear
rekey=no
ikelifetime=8h
keylife=1h
type=transport
left=10.32.32.199
leftprotoport=17/1701
right=10.32.32.146
rightprotoport=17/1701
----------------------------------------------------------------------------------------------------------------
# ipsec --version
Linux Openswan U/K(no kernel code presently loaded)
See `ipsec --copyright' for copyright information.
----------------------------------------------------------------------------------------------------------------
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openswan.org/pipermail/users/attachments/20191114/c3ac2683/attachment.html>
More information about the Users
mailing list