[Openswan Users] Openswan 2.6.50 programs segfault (kernel 2.6.39) with cross compile

[Brian Tuchten]

Hi,

I was wondering if any of the OpenSwan devs have any idea about what might be causing this pluto segfault.

Thanks!

-Brian

> It cross compiles and runs now without a segfault.  But pluto segfaults after
> connecting.
> 
> Oct  5 17:24:01 pluto[14698]: "AzureTest1" #1: transition from state
> STATE_IKEv2_START to state STATE_PARENT_I1 Oct  5 17:24:01 pluto[14698]:
> "AzureTest1" #1: STATE_PARENT_I1: sent v2I1, expected v2R1 (msgid:
> 00000000/00000000) Oct  5 17:24:01 pluto[14698]: "AzureTest1" #2: transition
> from state STATE_PARENT_I1 to state STATE_PARENT_I2 Oct  5 17:24:01
> pluto[14698]: "AzureTest1" #2: STATE_PARENT_I2: sent v2I2, expected v2R2
> {auth=IKEv2 oursig= theirsig= cipher=aes_256 integ=sha1_96 prf=oakley_sha
> group=modp1024} (msgid: 00000000/00000000) Oct  5 17:24:01 pluto[14698]:
> packet from 52.176.157.40:500: IKEv2 mode peer ID is ID_IPV4_ADDR:
> '52.x.x.x Oct  5 17:24:01 pluto[14698]: | checking TSi(1)/TSr(1) selectors,
> looking for exact match Oct  5 17:24:01 pluto[14698]: | printing contents
> struct traffic_selector
> Oct  5 17:24:01 pluto[14698]: |   ts_type: IKEv2_TS_IPV4_ADDR_RANGE
> Oct  5 17:24:01 pluto[14698]: |   ipprotoid: 0
> Oct  5 17:24:01 pluto[14698]: |   startport: 0
> Oct  5 17:24:01 pluto[14698]: |   endport: 65535
> Oct  5 17:24:01 pluto[14698]: |   ip low: 166.130.62.52
> Oct  5 17:24:01 pluto[14698]: |   ip high: 166.130.62.52
> Oct  5 17:24:01 pluto[14698]: | printing contents struct traffic_selector
> Oct  5 17:24:01 pluto[14698]: |   ts_type: IKEv2_TS_IPV4_ADDR_RANGE
> Oct  5 17:24:01 pluto[14698]: |   ipprotoid: 0
> Oct  5 17:24:01 pluto[14698]: |   startport: 0
> Oct  5 17:24:01 pluto[14698]: |   endport: 65535
> Oct  5 17:24:01 pluto[14698]: |   ip low: 52.176.157.40
> Oct  5 17:24:01 pluto[14698]: |   ip high: 52.176.157.40
> Oct  5 17:24:01 pluto[14707]: pluto_crypto_helper: helper [nonnss] (0) is
> exiting normally
> Oct  5 17:24:01 ipsec__plutorun: /usr/local/lib/ipsec/_plutorun: line 257:
> 14698 Segmentation fault      /usr/local/lib/ipsec/pluto --nofork --secretsfile
> /etc/ipsec/ipsec.secrets --ipsecdir /etc/ipsec/ipsec.d --use-auto --uniqueids -
> -nhelpers -1 --secctx_attr_value 32001
> Oct  5 17:24:01 ipsec__plutorun: !pluto failure!:  exited with error status 139
> (signal 11)