[Openswan Users] VPN tunnel up but traffic will not pass
Ryan Slick
speedy_1s at yahoo.com.au
Fri Oct 10 22:34:43 EDT 2014
Hi guys, I have phase 1 and 2 up on both sides. logs look good. But I cannot ping from either end.
One side is openswan, the other is Juniper firewall.
Traceroute from the juniper to the internal address shows the first hop failing, traceroute from openswan shows the traffic going out into the realms of the internet. It would appear openswan is not routing the traffic correctly. Juniper has permit any any rules on all interfaces.
Any help would be appreciated!
conn netconn7
authby="secret"
left=%defaultroute
leftsubnet=192.168.10.0/24
leftid=@routerA
right=111.69.xx.xx
rightsubnet=192.168.1.0/24
rightid=@srx
pfs=off
salifetime=28800s
ikelifetime=3600s
auth=esp
ike=aes128-sha1;modp768
phase2alg=aes128-sha1;modp768
dpdaction=restart
dpddelay=10
dpdtimeout=60
aggrmode=yes
auto=add
iptables:
oot:/etc# iptables -L -v -n
hain INPUT (policy ACCEPT 204 packets, 9136 bytes)
pkts bytes target prot opt in out source destination
5 145 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0
266 16806 macipport_filter_inbound all -- * * 0.0.0.0/0
0.0.0.0/0
266 16806 macipport_filter all -- * * 0.0.0.0/0 0.0.0
0/0
266 16806 filter all -- * * 0.0.0.0/0 0.0.0.0/0
hain FORWARD (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
0 0 macipport_filter_forward all -- * * 0.0.0.0/0
0.0.0.0/0
0 0 ipport_filter_forward all -- * * 0.0.0.0/0
.0.0.0/0
0 0 macipport_filter all -- * * 0.0.0.0/0 0.0.0
0/0
0 0 filter_forward all -- * * 0.0.0.0/0 0.0.0.0
0
hain OUTPUT (policy ACCEPT 195 packets, 30949 bytes)
pkts bytes target prot opt in out source destination
197 31007 macipport_filter_outbound all -- * * 0.0.0.0/0
0.0.0.0/0
hain filter (1 references)
pkts bytes target prot opt in out source destination
0 0 ACCEPT icmp -- wwan0 * 0.0.0.0/0 0.0.0.0/0
icmp type 8
0 0 ACCEPT tcp -- wwan0 * 0.0.0.0/0 192.168.10.1
tcp dpt:80
0 0 DROP tcp -- wwan0 * 0.0.0.0/0 0.0.0.0/0
tcp dpt:80
0 0 ACCEPT tcp -- wwan0 * 0.0.0.0/0 192.168.10.1
tcp dpt:443
0 0 DROP tcp -- wwan0 * 0.0.0.0/0 0.0.0.0/0
tcp dpt:443
0 0 ACCEPT tcp -- wwan0 * 0.0.0.0/0 0.0.0.0/0
tcp dpt:23
0 0 ACCEPT tcp -- wwan0 * 0.0.0.0/0 192.168.10.1
tcp dpt:22
0 0 DROP tcp -- wwan0 * 0.0.0.0/0 0.0.0.0/0
tcp dpt:22
7 1171 ACCEPT udp -- wwan0 * 0.0.0.0/0 0.0.0.0/0
udp dpt:500
0 0 ACCEPT udp -- wwan0 * 0.0.0.0/0 0.0.0.0/0
udp dpt:4500
0 0 ACCEPT esp -- wwan0 * 0.0.0.0/0 0.0.0.0/0
0 0 ACCEPT ah -- wwan0 * 0.0.0.0/0 0.0.0.0/0
0 0 ACCEPT all -- wwan0 * 0.0.0.0/0 0.0.0.0/0
state RELATED,ESTABLISHED
0 0 DROP all -- wwan0 * 0.0.0.0/0 0.0.0.0/0
hain filter_forward (1 references)
pkts bytes target prot opt in out source destination
0 0 ACCEPT all -- wwan0 * 0.0.0.0/0 0.0.0.0/0
mark match 0x1
0 0 ACCEPT all -- wwan0 * 0.0.0.0/0 0.0.0.0/0
state RELATED,ESTABLISHED
0 0 DROP all -- wwan0 * 0.0.0.0/0 0.0.0.0/0
hain ipport_filter_forward (1 references)
pkts bytes target prot opt in out source destination
root:/etc# netstat -rn
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
0.0.0.0 49.226.157.41 0.0.0.0 UG 0 0 0 wwan0
49.226.157.40 0.0.0.0 255.255.255.252 U 0 0 0 wwan0
192.168.10.0 0.0.0.0 255.255.255.0 U 0 0 0 br0
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openswan.org/pipermail/users/attachments/20141010/e1f62368/attachment.html>
More information about the Users
mailing list