[Openswan Users] problem route

[Walter Willis]

hello people XD . after time return the list,

i am problem with a openswan version 2.6.32 in centos 6.4 and 64 bits,
install the tar.gz openswan and configure ipsec.secrets and ipsec.conf :

version 2.0     # conforms to second version of ipsec.conf specification

# basic configuration
config setup
        # Debug-logging controls:  "none" for (almost) none, "all" for lots.
        klipsdebug=none
        # plutodebug="control parsing"
        # For Red Hat Enterprise Linux and Fedora, leave protostack=netkey
        protostack=netkey
        nat_traversal=yes
        oe=off
        virtual_private=%v4:192.168.112.0/24
        # Enable this if you see "failed to find any available worker"
        nhelpers=0
        interfaces=%defaultroute


conn prueba
        keyingtries=1000
        authby=rsasig
        rekey=yes
        left=216.243.181.45            # Local vitals
        leftsubnet=192.168.112.0/24
        leftid=@216.243.181.45
             leftrsasigkey=0sAQNp2...
        leftnexthop=216.243.181.41
        right=181.65.141.26
        rightsubnet=192.168.111.0/24
        rightid=@181.65.141.26
        rightrsasigkey=0sAQN3CJ/klZZO...
        rightnexthop=181.65.141.25
        auto=route

the conexion stablished, but not route


# route
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use
Iface
216.244.171.40  *               255.255.255.248 U     0      0        0 eth0
192.168.112.0   *               255.255.255.0   U     0      0        0 eth1
default         mydomain.com 0.0.0.0         UG    0      0        0 eth0


not show the route to other lan,

what happen the configuration ??? i am add route ?? bug the openswan
version ?

what is solution to it is problem ???


thanks.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openswan.org/pipermail/users/attachments/20141002/fbd46db0/attachment.html>