[Openswan Users] IPsec route all traffic

[Aleksander Ol]

config setup
interfaces="%defaultroute"
nat_traversal=yes
protostack=netkey
plutostderrlog=/var/log/pluto.log
plutodebug="all"
conn VPN
forceencaps=yes
dpddelay=30
dpdtimeout=120
dpdaction=restart
ike=aes-256-sha1;modp1024
ikelifetime=86400s
authby=secret
type=tunnel
salifetime=3600s
pfs=yes
phase2=esp
phase2alg=aes-128-sha1;modp1024
left=185.XXX.XXX
leftsubnet=10.XXX.XXX.XXX/24
leftnexthop=%defaultroute
right=91.YYY.YYY.YYY
rightsubnet=10.11.YYY.YY/24
rightnexthop=%defaultroute
auto=start
 


Mon, 09 Jun 2014 09:37:59 +0100 от Dan Cave <dan.cave at me.com>:
>Please post your configuring
>
>:)
>
>On 8 Jun 2014 19:07, Aleksander Ol < aleksander_2005 at mail.ru > wrote:
>>
>> Good afternoon.
>> I can not send traffic as IPSEC.
>>
>> configured so
>> 1) Eth0 ( Internal Network .... 192.168.0.0/24 )
>> 2) Eth1  ( Internet )
>>
>> I setup Openswan IPsec .... use (netkey ) 
>> Now All local traffic work fine ... but i neet route all traffic to VPN .... Internet also.
>> I need that users went through a remote gateway with any established VPN connection
>> If that does not work VPN Internet also should not work
>>
>> The problem is that OpenSwan IPSEC does not create a separate interface 
>>
>> If anyone knows how to config. Help please
>>
>> Sorry for my english
>>
>>
>> -- 
>> Aleksander Ol

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openswan.org/pipermail/users/attachments/20140610/966c63eb/attachment.html>