[Openswan Users] sending notification PAYLOAD_MALFORMED

[Paul Young]

I also just tried replacing the PSK on both sides and got the same issue
continued


On 23 September 2013 18:39, Paul Young <paul at arkig.com> wrote:

> Hi all,
>
> After rebooting one side of my Openswan setup without changing config and
> so on I am getting this error and cannot create a tunnel anymore.
>
> The reason I rebooted the host is I applied a bunch of firmware updates to
> the hardware.
>
> Sep 23 18:33:23 lobster pluto[38968]: "conn"[11] <outside IP address> #55:
> next payload type of ISAKMP Identification Payload has an unknown value: 23
> Sep 23 18:33:23 lobster pluto[38968]: "conn"[11] <outside IP address> #55:
> probable authentication failure (mismatch of preshared secrets?): malformed
> payload in packet
> Sep 23 18:33:23 lobster pluto[38968]: | payload malformed after IV
> Sep 23 18:33:23 lobster pluto[38968]: |   74 40 8b d3  5a 30 3e 52  dc 54
> 26 a5  d9 88 bc e9
> Sep 23 18:33:23 lobster pluto[38968]: |   e4 ea 8e 4b
> Sep 23 18:33:23 lobster pluto[38968]: "conn"[11] <outside IP address> #55:
> sending notification PAYLOAD_MALFORMED to <outside IP address>:500
>
> I have triple checked the PSK and it appears to be fine. What am I missing?
>
> Thanks,
> Paul
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openswan.org/pipermail/users/attachments/20130923/f7e902c8/attachment-0001.html>