[Openswan Users] No traffic through the VPN tunnel

[Walter Robert Ditzler]

Hi,

I successfully established a VPN tunnel, verified by the counter party. The
problem I got is, the telnet on port 44040 wants to go through the tunnel
but doesn't arrive at the other side of the tunnel.

Any idea what this "Async event  (0x20)  timer expired" means?

Thanks a lot,

Walter.


***
000 #3433: "ipsec-c":500 STATE_QUICK_I2 (sent QI2, IPsec SA established);
EVENT_SA_REPLACE in 2622s; newest IPSEC; eroute owner; isakmp#3279; idle;
import:admin initiate
000 #3433: "ipsec-c" esp.6613d41 at x.x.x.x esp.9eeb1f6e at 10.41.10.2
tun.0 at x.x.x.x tun.0 at 10.41.10.2 ref=0 refhim=4294901761
000 #3392: "ipsec-c":500 STATE_QUICK_I2 (sent QI2, IPsec SA established);
EVENT_SA_EXPIRE in 383s; isakmp#3279; idle; import:admin initiate
000 #3392: "ipsec-c" esp.6613d3e at x.x.x.x esp.1b01e968 at 10.41.10.2
tun.0 at x.x.x.x tun.0 at 10.41.10.2 ref=0 refhim=4294901761
000 #3279: "ipsec-c":500 STATE_MAIN_I4 (ISAKMP SA established);
EVENT_SA_REPLACE in 16892s; newest ISAKMP; lastdpd=-1s(seq in:0 out:0);
idle; import:admin initiate

root at srv-ldeb-fwal01:~# ip xfrm monitor
Async event  (0x20)  timer expired
        src 10.41.10.2 dst x.x.x.x  reqid 0x4001 protocol esp  SPI 0x6613d41
Async event  (0x20)  timer expired
        src 10.41.10.2 dst x.x.x.x  reqid 0x4001 protocol esp  SPI 0x6613d41
Async event  (0x20)  timer expired
        src 10.41.10.2 dst x.x.x.x  reqid 0x4001 protocol esp  SPI 0x6613d41
***