[Openswan Users] VPN setup between dedicated server and CISCO firewall

[Leto]

yes, the tunnel works bidirectional 

sent from a tiny device 

On 2013-11-06, at 0:29, "Rishad Ali" <rishad.ali at turnkey-instruments.com> wrote:

>  
> > # service ipsec start
> > failed to start openswan IKE daemon - the following error occured:
> > cannot load config '/etc/ipsec.conf': /etc/ipsec.conf:20: syntax error, unexpected STRING, expecting EOL [network]
> Hi,
> OK that was just a comment for the leftsubnet.
> One more question,
> Can I use the server (where I terminate the VPN) as a client at the same time to get to the other side of the VPN tunnel?
> I run few applications on my sever, is it possible to configure those application use the VPN and connect to the devices on the other side of the VPN tunnel ?
>  
> Thanks
>  
> From: Leto [mailto:letoams at gmail.com] 
> Sent: 05 November 2013 16:02
> To: Rishad Ali
> Cc: <users at lists.openswan.org>
> Subject: Re: [Openswan Users] VPN setup between dedicated server and CISCO firewall
>  
> 
> 
> sent from a tiny device 
> 
> On 2013-11-05, at 1:02, "Rishad Ali" <rishad.ali at turnkey-instruments.com> wrote:
> 
> Hi Leto,
>  
> Thanks for your reply. When I leave out leftsubnet blank it gives me an error
> # service ipsec start
> failed to start openswan IKE daemon - the following error occured:
> cannot load config '/etc/ipsec.conf': /etc/ipsec.conf:20: syntax error, unexpected STRING, expecting EOL [network]
>  
>  
> you have an error in your configuration file. you seem to have a bad keyword 'network'.
>  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openswan.org/pipermail/users/attachments/20131106/fd4ab737/attachment.html>