[Openswan Users] Site-to-site + OpenVPN

[Damir Reic]

> -----Original Message-----
> From: Simon Deziel [mailto:simon at xelerance.com]
> Sent: Monday, May 13, 2013 8:39 PM
> To: Damir Reic
> Cc: users at lists.openswan.org
> Subject: Re: [Openswan Users] Site-to-site + OpenVPN
> 
> On 13-05-13 02:29 PM, Damir Reic wrote:
> >>> OpenVPN is running on 50.56.213.234. So i want to configure 1st
> >>> server
> >>> (50.56.213.56) that requests on OpenVPN ports are pushed inside the
> >> tunnel.
> >>
> >> On the 50.56.213.234 side, make sure OpenVPN binds to 50.56.213.234
> >> or 0.0.0.0.
> >>
> >> On the 50.56.213.56 side, make sure the OpenVPN clients connects to
> >> the listening port on 50.56.213.234.
> >>
> >> You should probably disable all firewalling on both sides while you
> >> are debugging this issue and enable it afterwards.
> >>
> >> HTH,
> >> Simon
> >
> > How do i make sure Openvpn clients connect to 50.56.213.234 over the
> > 1st server? Clients are NOT behind a firewall on 50.56.213.56 IP, they
> > are internet users with their public IP.
> 
> I'm having a hard time figuring what you are after. So far I know you have
an
> IPsec transport connection going between 50.56.213.56 and 50.56.213.234.
> Where the OpenVPN piece fits in this I'm unsure. Could you better explain
> what you are trying to achieve?
> 
> Simon

I am trying to achieve there users use intermediatery  server whith secure
connection to destionation openvpn server.