[Openswan Users] OAKLEY_DES_CBC is not supported. Attribute OAKLEY_ENCRYPTION_ALGORITHM
Damir Reic
dreic at email.t-com.hr
Sat Mar 23 18:24:59 UTC 2013
Hello,
can anyone tell me what does this message mean?
I have this info from remote side:
*Remote Secure Group
Opcion= IP Addr
Ip Interna = xxxxxxxxxxxxxxxx
*Remote Gateway
Opcion= IP Addr
IUSACELL IP = xxxxxxxxxxxxxxxxxxx
Encryption: 3DES
Authentication: SHA
*KEY Management
--------------
Auto IKE
PFS= Disabled
PSK= pass
Key Lifetime: 3600s
*Key grupo 1
------------
3DES
SHA-1
1024-bit
28800
*Key grupo 2
------------
3DES
SHA
1024it
PFS (Off)
3600
This is my config:
config setup
# Debug-logging controls: "none" for (almost) none, "all" for lots.
# klipsdebug=none
# plutodebug="control parsing"
#plutodebug="all"
# For Red Hat Enterprise Linux and Fedora, leave protostack=netkey
protostack=netkey
#nat_traversal=yes
virtual_private=%v4:172.16.0.0/12,%v4:192.168.0.0/16,%v4:10.0.0.0/8,%v4:!10.
1.1.0/24
oe=off
# Enable this if you see "failed to find any available worker"
# nhelpers=0
conn host-to-host1
left=1.1.1.1
#leftnexthop=%defaultroute
leftsubnet=1.1.1.1/32
right=2.2.2.2
rightsubnet=2.2.2.3/32
#rightnexthop=%defaultroute
auto=start
keyexchange=ike
authby=secret
ike=3des-sha1;modp1024
phase2=esp
phase2alg=3des-sha1;modp1024
ikelifetime=28800s
salifetime=3600s
pfs=no
type=tunnel
# rekey=yes
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openswan.org/pipermail/users/attachments/20130323/c7c22969/attachment.html>
More information about the Users
mailing list