[Openswan Users] EC2 Instance trying to connect to Sonicwall via Openswan, not getting any IP and can't route

[doug m]

Working with a client and I'm thinking maybe the Sonicwall is at fault. I
am trying to use the Linux instance to connect to the VPN via Sonicwall so
it should be getting fed an IP from the 192.168.10.0/24 range but it gets
nothing. It authenticates and is showing connected.

004 "sonicwall" #2: STATE_QUICK_I2: sent QI2, IPsec SA established tunnel
mode {ESP=>0x9eb4577b <0xfde7e679 xfrm=3DES_0-HMAC_SHA1 NATOA=none
NATD=none DPD=none}

But I notice this in ipsec auto --status:

000 "sonicwall":     myip=unset; hisip=unset;

Here is the config:

config setup
        virtual_private=virtual_private=%v4:192.168.10.0/24
        nat_traversal=yes
        oe=off
        protostack=netkey
        plutodebug=none
        interfaces=%defaultroute
conn sonicwall
        type=tunnel
        left=xxxxxxxxxxx.compute.amazonaws.com
        leftnexthop=%defaultroute
        leftsubnet=0.0.0.0/0.0.0.0
        leftprotoport=17/1701
        leftid=@GroupVPN
        leftxauthclient=yes
        leftxauthusername=XXXXXX
        right=remote.server.com
        rightsubnet=192.168.10.0/24
        rightprotoport=17/0
        rightxauthserver=yes
        rightid=@XXXXXXXX  # The sonicwall's UID
        pfs=no
        aggrmode=yes
        keyexchange=ike
        auto=add
        auth=esp
        esp=3des-sha1
        ike=3des-sha1-modp1024
        ikelifetime=8h
        authby=secret
        rekey=no

Not sure what next steps are -- there isn't much I haven't tried, any
suggestions?
thanks-
-doug
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openswan.org/pipermail/users/attachments/20130731/c1c87b65/attachment.html>