[Openswan Users] VPN Transport Mode, Windows 7, xl2tpd, openswan - setup feasibility check

[Willie Gillespie]

Look also at your /etc/xl2tpd/xl2tpd.conf file

On 10/6/2012 4:00 PM, Karl wrote:

> Windows log says “Event ID 20226 with reason code 829”. I googled a
> little bit and only found explanations into the direction of modem
> connect problems. (?). I am going to focus on PPP configuration now. I
> cannot find l2tpd.log file?
>
> Any ideas?
>
> Regards,
>
> Horst
>
> --- PPP config file ---
>
> /etc/ppp/options.xl2tpd   [B---] 19 L:[  1+25  26/ 27] *(294 / 295b)
> 0010 0x00A
>
> require-mschap-v2
>
> asyncmap 0
>
> hide-password
>
> modem
>
> ipcp-accept-local
>
> ipcp-accept-remote
>
> noccp
>
> auth
>
> crtscts
>
> idle 1800
>
> mtu 1400
>
> mre 1400
>
> nodefaultroute
>
> debug
>
> lock
>
> proxyarp
>
> connect-delay 5000
>
> logfd 2
>
> logfile /var/log/l2tpd.log
>
> ms-dns 8.8.8.8
>
> ms-dns 8.8.4.4
>
> lcp-echo-failure 12
>
> lcp-echo-interval 5
>
>
>
> _______________________________________________
> Users at lists.openswan.org
> https://lists.openswan.org/mailman/listinfo/users
> Micropayments: https://flattr.com/thing/38387/IPsec-for-Linux-made-easy
> Building and Integrating Virtual Private Networks with Openswan:
> http://www.amazon.com/gp/product/1904811256/104-3099591-2946327?n=283155
>