[Openswan Users] OpenSwan VPN connectivity to VPN 3030 I need Help from you Guys
Imran Shakir
shaker.emran at gmail.com
Fri Mar 30 04:14:18 EDT 2012
Hi
I've installed Openswan on Ubuntu 10.04.
it has two interfaces
eth0 10.202.70.227
eth0:0 192.168.222.66
live/public or peer ip from my side is 50.17.183.241
other side is VPN 3030
peer ip from their side is 202.125.152.237
subnet from their side is 172.16.5.0/24
host from their side that sends request to my machine is 172.16.5.67/32
I've one network interface: eth0 = 10.202.70.227.
I've created another Virtual Network Interface: eth0:0 = 192.168.222.66.
I've Elastic IP: 50.17.183.241.
I've done natting with following commands:
iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
then used more commands like this:
iptables --flush
iptables -t nat --flush
iptables --delete-chain
iptables -t nat --delete-chain
iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE iptables -A
FORWARD -i eth0:0 -j ACCEPT
I've configured my connection as under:
conn TEST
type=tunnel
authby=secret
ike=3des-md5-modp1024
ikelifetime=86400s
phase2=esp
phase2alg=3des-md5;modp1024
lifetime=28800s
forceencaps=yes
pfs=no
left=10.202.70.227
leftid=50.17.183.241
leftnexthop=%defaultroute
leftsubnet=192.168.222.66/32
right=202.125.152.237
rightid=202.125.152.237
rightsubnet=172.16.5.67/32
rightnexthop=%defaultroute
dpdaction=restart
dpddelay=30
dpdtimeout=45
auto=add
now when I try to start a tunnel with command: ipsec auto --up TEST, but
tunnel is not coming up and ping is not being done to other side ip
addresses. when i ping 172.16.b.b. I don't get
any reply.
All ports opened for all IP Addresses, firewall allow all. Still no
success.
My routing table is as under:
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.222.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
10.202.70.0 0.0.0.0 255.255.254.0 U 0 0 0 eth0
0.0.0.0 10.202.70.1 0.0.0.0 UG 100 0 0 eth0
0.0.0.0 10.202.70.1 0.0.0.0 UG 100 0 0 eth0
iptables -L show:
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain FORWARD (policy ACCEPT)
target prot opt source destination
ACCEPT all -- anywhere anywhere
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
kindly guide me what i am missing, tunnel is being established
successfully but cannot ping other side, and they cannot ping me?
A I missing any route? Kindly do let me know what route to add, if
missed any?
Thank you very much. Waiting for any answer. Thank you guys.
Regards
Imran
LOG is:
> Mar 29 09:51:49 mx2 pluto[10593]: "ufoneIN" #2236: Dead Peer Detection
> (RFC 3706): enabled Mar 29 09:51:49 mx2 pluto[10593]: "ufoneIN" #2237:
> initiating Quick Mode
> PSK+ENCRYPT+TUNNEL+UP+IKEv2ALLOW {using isakmp#2236 msgid:a2d8cddd
> proposal=3DES(3)_192-MD5(1)_128 pfsgroup=no-pfs} Mar 29 09:51:49 mx2
> pluto[10593]: "ufoneIN" #2236: ignoring informational payload, type
> IPSEC_RESPONDER_LIFETIME msgid=00000000 Mar 29 09:51:49 mx2
> pluto[10593]: "ufoneIN" #2236: received and ignored informational
> message Mar 29 09:51:50 mx2 pluto[10593]: "ufoneIN" #2236: received
> Delete SA
> payload: deleting ISAKMP State #2236
> Mar 29 09:51:50 mx2 pluto[10593]: packet from 202.125.152.237:4500:
> received and ignored informational message Mar 29 09:52:01 mx2
> CRON[21635]: pam_unix(cron:session): session opened for user root by
> (uid=0) Mar 29 09:52:01 mx2 CRON[21635]: pam_unix(cron:session):
> session closed for user root Mar 29 09:52:32 mx2 pluto[10593]:
> "ufoneIN": deleting connection Mar 29 09:52:32 mx2 pluto[10593]:
> "ufoneIN" #2237: deleting state
> (STATE_QUICK_I1)
> Mar 29 09:52:32 mx2 pluto[10593]: added connection description "ufoneIN"
> Mar 29 09:52:36 mx2 pluto[10593]: "ufoneIN" #2238: initiating Main
> Mode Mar 29 09:52:37 mx2 pluto[10593]: "ufoneIN" #2238: received
> Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n] method set to=106
> Mar 29 09:52:37 mx2 pluto[10593]: "ufoneIN" #2238: ignoring Vendor ID
> payload [FRAGMENTATION c0000000] Mar 29 09:52:37 mx2 pluto[10593]:
> "ufoneIN" #2238: enabling possible NAT-traversal with method
> draft-ietf-ipsec-nat-t-ike-05 Mar 29 09:52:37 mx2 pluto[10593]:
> "ufoneIN" #2238: transition from state
> STATE_MAIN_I1 to state STATE_MAIN_I2
> Mar 29 09:52:37 mx2 pluto[10593]: "ufoneIN" #2238: STATE_MAIN_I2: sent
> MI2, expecting MR2 Mar 29 09:52:37 mx2 pluto[10593]: "ufoneIN" #2238:
> received Vendor ID payload [Cisco-Unity] Mar 29 09:52:37 mx2
> pluto[10593]: "ufoneIN" #2238: received Vendor ID payload [XAUTH] Mar
> 29 09:52:37 mx2 pluto[10593]: "ufoneIN" #2238: ignoring unknown Vendor
> ID payload [938d9ec7b1eb6956bf8485a99551f9b7]
> Mar 29 09:52:37 mx2 pluto[10593]: "ufoneIN" #2238: ignoring Vendor ID
> payload [Cisco VPN 3000 Series] Mar 29 09:52:37 mx2 pluto[10593]:
> "ufoneIN" #2238: NAT-Traversal: Result using
> draft-ietf-ipsec-nat-t-ike-02/03: both are NATed Mar 29 09:52:37 mx2
> pluto[10593]: "ufoneIN" #2238: transition from state
> STATE_MAIN_I2 to state STATE_MAIN_I3
> Mar 29 09:52:37 mx2 pluto[10593]: "ufoneIN" #2238: STATE_MAIN_I3: sent
> MI3, expecting MR3 Mar 29 09:52:37 mx2 pluto[10593]: "ufoneIN" #2238:
> received Vendor ID payload [Dead Peer Detection] Mar 29 09:52:37 mx2
> pluto[10593]: | protocol/port in Phase 1 ID Payload is 17/0. accepted
> with port_floating NAT-T Mar 29 09:52:37 mx2 pluto[10593]: "ufoneIN"
> #2238: Main mode peer ID is
> ID_IPV4_ADDR: '202.125.152.237'
> Mar 29 09:52:37 mx2 pluto[10593]: "ufoneIN" #2238: transition from
> state
> STATE_MAIN_I3 to state STATE_MAIN_I4
> Mar 29 09:52:37 mx2 pluto[10593]: "ufoneIN" #2238: STATE_MAIN_I4:
> ISAKMP SA established {auth=OAKLEY_PRESHARED_KEY
> cipher=oakley_3des_cbc_192
> prf=oakley_md5 group=modp1024}
> Mar 29 09:52:37 mx2 pluto[10593]: "ufoneIN" #2238: Dead Peer Detection
> (RFC 3706): enabled Mar 29 09:52:37 mx2 pluto[10593]: "ufoneIN" #2239:
> initiating Quick Mode
> PSK+ENCRYPT+TUNNEL+UP+IKEv2ALLOW {using isakmp#2238 msgid:3544a45b
> proposal=3DES(3)_192-MD5(1)_128 pfsgroup=no-pfs} Mar 29 09:52:37 mx2
> pluto[10593]: "ufoneIN" #2238: ignoring informational payload, type
> IPSEC_RESPONDER_LIFETIME msgid=00000000 Mar 29 09:52:37 mx2
> pluto[10593]: "ufoneIN" #2238: received and ignored informational
> message Mar 29 09:52:38 mx2 pluto[10593]: "ufoneIN" #2238: received
> Delete SA
> payload: deleting ISAKMP State #2238
> Mar 29 09:52:38 mx2 pluto[10593]: packet from 202.125.152.237:4500:
> received and ignored informational message
>
> Any idea how to resolve it?
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.openswan.org/pipermail/users/attachments/20120330/53207aa5/attachment-0001.html>
More information about the Users
mailing list