[Openswan Users] Openswan not updating the routing table
nemus at grayhatlabs.com
nemus at grayhatlabs.com
Wed Mar 7 19:00:11 EST 2012
I am trying to get openswan to connect to a pfsense box.
The pfsense box connects and says everything is good.
I can ping 172.x.x.1 from pfsense its self.
ipsec --version
Linux Openswan U2.6.33/K2.6.35.4-rscloud (netkey)
See `ipsec --copyright' for copyright information
so I don't know how to do the route so everything will work.
also I read some where on linux forums that netkey does not do tunnel mode
is this true?
thanks
on the openswan I see
# /etc/ipsec.conf - Openswan IPsec configuration file
#
# Manual: ipsec.conf.5
#
# Please place your own config files in /etc/ipsec.d/ ending in .conf
version 2.0 # conforms to second version of ipsec.conf specification
# basic configuration
config setup
# Debug-logging controls: "none" for (almost) none, "all" for lots.
# klipsdebug=none
plutodebug="control parsing"
# For Red Hat Enterprise Linux and Fedora, leave protostack=netkey
protostack=netkey
#nat_traversal=yes
#virtual_private=%v4:192.168.0.0/16
#oe=off
# Enable this if you see "failed to find any available worker"
nhelpers=0
#You may put your configuration (.conf) file in the "/etc/ipsec.d/"
conn net-to-net
type=tunnel
authby = secret
left = x.x.x.236
leftsubnet = 172.x.x.0/24
right= x.x.x.50
rightsubnet= 10.x.x.0/24
esp = 3des-md5
keyexchange = ike
pfs = no
auto = start
ipsec setup status
IPsec running - pluto pid: 9999
pluto pid 9999
1 tunnels up
some eroutes exist
ipsec auto --status
000 using kernel interface: netkey
000 interface lo/lo ::1
000 interface lo/lo 127.0.0.1
000 interface eth0/eth0 50.x.x.x6
000 interface eth1/eth1 10.x.x.146
000 interface tun0/tun0 172.x.x.1
000 %myid = (none)
000 debug parsing+control
000
000 virtual_private (%priv):
000 - allowed 0 subnets:
000 - disallowed 0 subnets:
000 WARNING: Either virtual_private= is not specified, or there is a syntax
000 error in that line. 'left/rightsubnet=vhost:%priv' will not
work!
000 WARNING: Disallowed subnets in virtual_private= is empty. If you have
000 private address space in internal use, it should be excluded!
000
000 algorithm ESP encrypt: id=2, name=ESP_DES, ivlen=8, keysizemin=64,
keysizemax=64
000 algorithm ESP encrypt: id=3, name=ESP_3DES, ivlen=8, keysizemin=192,
keysizemax=192
000 algorithm ESP encrypt: id=6, name=ESP_CAST, ivlen=8, keysizemin=40,
keysizemax=128
000 algorithm ESP encrypt: id=7, name=ESP_BLOWFISH, ivlen=8,
keysizemin=40, keysizemax=448
000 algorithm ESP encrypt: id=11, name=ESP_NULL, ivlen=0, keysizemin=0,
keysizemax=0
000 algorithm ESP encrypt: id=12, name=ESP_AES, ivlen=8, keysizemin=128,
keysizemax=256
000 algorithm ESP encrypt: id=13, name=ESP_AES_CTR, ivlen=8,
keysizemin=128, keysizemax=256
000 algorithm ESP encrypt: id=14, name=ESP_AES_CCM_A, ivlen=8,
keysizemin=128, keysizemax=256
000 algorithm ESP encrypt: id=15, name=ESP_AES_CCM_B, ivlen=8,
keysizemin=128, keysizemax=256
000 algorithm ESP encrypt: id=16, name=ESP_AES_CCM_C, ivlen=8,
keysizemin=128, keysizemax=256
000 algorithm ESP encrypt: id=18, name=ESP_AES_GCM_A, ivlen=8,
keysizemin=128, keysizemax=256
000 algorithm ESP encrypt: id=19, name=ESP_AES_GCM_B, ivlen=8,
keysizemin=128, keysizemax=256
000 algorithm ESP encrypt: id=20, name=ESP_AES_GCM_C, ivlen=8,
keysizemin=128, keysizemax=256
000 algorithm ESP encrypt: id=22, name=ESP_CAMELLIA, ivlen=8,
keysizemin=128, keysizemax=256
000 algorithm ESP encrypt: id=252, name=ESP_SERPENT, ivlen=8,
keysizemin=128, keysizemax=256
000 algorithm ESP encrypt: id=253, name=ESP_TWOFISH, ivlen=8,
keysizemin=128, keysizemax=256
000 algorithm ESP auth attr: id=1, name=AUTH_ALGORITHM_HMAC_MD5,
keysizemin=128, keysizemax=128
000 algorithm ESP auth attr: id=2, name=AUTH_ALGORITHM_HMAC_SHA1,
keysizemin=160, keysizemax=160
000 algorithm ESP auth attr: id=5, name=AUTH_ALGORITHM_HMAC_SHA2_256,
keysizemin=256, keysizemax=256
000 algorithm ESP auth attr: id=6, name=AUTH_ALGORITHM_HMAC_SHA2_384,
keysizemin=384, keysizemax=384
000 algorithm ESP auth attr: id=7, name=AUTH_ALGORITHM_HMAC_SHA2_512,
keysizemin=512, keysizemax=512
000 algorithm ESP auth attr: id=8, name=AUTH_ALGORITHM_HMAC_RIPEMD,
keysizemin=160, keysizemax=160
000 algorithm ESP auth attr: id=9, name=AUTH_ALGORITHM_AES_CBC,
keysizemin=128, keysizemax=128
000 algorithm ESP auth attr: id=251, name=(null), keysizemin=0, keysizemax=0
000
000 algorithm IKE encrypt: id=0, name=(null), blocksize=16, keydeflen=131
000 algorithm IKE encrypt: id=3, name=OAKLEY_BLOWFISH_CBC, blocksize=8,
keydeflen=128
000 algorithm IKE encrypt: id=5, name=OAKLEY_3DES_CBC, blocksize=8,
keydeflen=192
000 algorithm IKE encrypt: id=7, name=OAKLEY_AES_CBC, blocksize=16,
keydeflen=128
000 algorithm IKE encrypt: id=65004, name=OAKLEY_SERPENT_CBC,
blocksize=16, keydeflen=128
000 algorithm IKE encrypt: id=65005, name=OAKLEY_TWOFISH_CBC,
blocksize=16, keydeflen=128
000 algorithm IKE encrypt: id=65289, name=OAKLEY_TWOFISH_CBC_SSH,
blocksize=16, keydeflen=128
000 algorithm IKE hash: id=1, name=OAKLEY_MD5, hashsize=16
000 algorithm IKE hash: id=2, name=OAKLEY_SHA1, hashsize=20
000 algorithm IKE hash: id=4, name=OAKLEY_SHA2_256, hashsize=32
000 algorithm IKE hash: id=6, name=OAKLEY_SHA2_512, hashsize=64
000 algorithm IKE dh group: id=2, name=OAKLEY_GROUP_MODP1024, bits=1024
000 algorithm IKE dh group: id=5, name=OAKLEY_GROUP_MODP1536, bits=1536
000 algorithm IKE dh group: id=14, name=OAKLEY_GROUP_MODP2048, bits=2048
000 algorithm IKE dh group: id=15, name=OAKLEY_GROUP_MODP3072, bits=3072
000 algorithm IKE dh group: id=16, name=OAKLEY_GROUP_MODP4096, bits=4096
000 algorithm IKE dh group: id=17, name=OAKLEY_GROUP_MODP6144, bits=6144
000 algorithm IKE dh group: id=18, name=OAKLEY_GROUP_MODP8192, bits=8192
000 algorithm IKE dh group: id=22, name=OAKLEY_GROUP_DH22, bits=1024
000 algorithm IKE dh group: id=23, name=OAKLEY_GROUP_DH23, bits=2048
000 algorithm IKE dh group: id=24, name=OAKLEY_GROUP_DH24, bits=2048
000
000 stats db_ops: {curr_cnt, total_cnt, maxsz} :context={0,2,64}
trans={0,2,3072} attrs={0,2,2048}
000
000 "net-to-net":
172.x.x.0/24===x.x.x.236<x.x.x.236>[+S=C]...x.x.x.50<x.x.x.50>[+S=C]===10.x.x.0/24;
erouted; eroute owner: #2
000 "net-to-net": myip=unset; hisip=unset;
000 "net-to-net": ike_life: 3600s; ipsec_life: 28800s; rekey_margin:
540s; rekey_fuzz: 100%; keyingtries: 0
000 "net-to-net": policy:
PSK+ENCRYPT+TUNNEL+UP+IKEv2ALLOW+SAREFTRACK+lKOD+rKOD; prio: 24,24;
interface: eth0;
000 "net-to-net": newest ISAKMP SA: #1; newest IPsec SA: #2;
000 "net-to-net": IKE algorithm newest: 3DES_CBC_192-MD5-MODP1024
000 "net-to-net": ESP algorithms wanted: 3DES(3)_000-MD5(1)_000;
flags=-strict
000 "net-to-net": ESP algorithms loaded: 3DES(3)_192-MD5(1)_128
000 "net-to-net": ESP algorithm newest: 3DES_000-HMAC_MD5; pfsgroup=<N/A>
000
000 #2: "net-to-net":500 STATE_QUICK_I2 (sent QI2, IPsec SA established);
EVENT_SA_REPLACE in 27753s; newest IPSEC; eroute owner; isakmp#1; idle;
import:admin initiate
000 #2: "net-to-net" esp.4f845fa at x.x.x.50 esp.bc46ab15 at x.x.x.x
tun.0 at x.x.x.x tun.0 at z.x.x.236 ref=0 refhim=4294901761
000 #1: "net-to-net":500 STATE_MAIN_I4 (ISAKMP SA established);
EVENT_SA_REPLACE in 2312s; newest ISAKMP; lastdpd=1s(seq in:0 out:0);
idle; import:admin initiate
More information about the Users
mailing list