[Openswan Users] openswan 184.108.40.206 FC 17
elison.niven at elitecore.com
Mon Aug 27 01:57:50 EDT 2012
Try adding leftsourceip=192.168.20.x to your configuration.
On Saturday 25 August 2012 11:44 PM, Anthony Ppar wrote:
> Linux FC17 machine connecting to Sonicwall NSA 3500 using ipsec tunnel mode and
> Current configuration works and I can see and connect to the remote network
> resources. However, when I connect to a remote resource, such as 192.168.20.10,
> I can see that my ip address is 192.168.1.9.
> Instead of this 1.9 source address, I need my source to be something in the 20.x
> I have DHCP enabled on SonicWall and when my Windows users connect using the
> Sonicwall GVC client, they obtain an address via dhcp and are assigned one from
> the 20.x pool. How can I reconfigure my connection from FC linux box so I am
> assigned a 20.x address for the tunnel link?
> Thanks for any assistance you can provide.
> Here's my current config.
> config setup
> # Debug-logging controls: "none" for (almost) none, "all" for lots.
> # klipsdebug=all
> #plutodebug="control parsing"
> # For Red Hat Enterprise Linux and Fedora, leave protostack=netkey
> # protostack=klips
> # Enable this if you see "failed to find any available worker"
> conn sonicwall
> Users at lists.openswan.org
> Micropayments: https://flattr.com/thing/38387/IPsec-for-Linux-made-easy
> Building and Integrating Virtual Private Networks with Openswan:
More information about the Users