[Openswan Users] Openswan 2.6.35 interop with fortigate 200B

[Goffe, Don]

We use the 100D and the 600C with 2.6.38-NETKEY and no issues. We haven't tried the 200B product.
 

-----Original Message-----
From: users-bounces at lists.openswan.org [mailto:users-bounces at lists.openswan.org] On Behalf Of Patrick Lists
Sent: Wednesday, April 25, 2012 1:46 PM
To: users at lists.openswan.org
Subject: Re: [Openswan Users] Openswan 2.6.35 interop with fortigate 200B

On 04/25/2012 04:43 PM, Siegfried Müller - MB Connect Line GmbH wrote:
> Hi,
>
> does anyone has experiences with fortigate200b firewall? We used 
> openswan 2.4.5 (as client) with fortigate200b (as server). Now we did 
> a update to openswan 2.6.35 and then one issue occurred. After 
> transferring f.e. a file through the vpn tunnel, it stops after 
> 180-200KB. No error messages on pluto or klips. Also a VNC session 
> interrupted after first seconds. Everything is fine on 2.4.5. Any ideas?

Unfortunately not. But the latest version is 2.6.38. Maybe you could upgrade to 2.6.38 and try again?

Regards,
Patrick

_______________________________________________
Users at lists.openswan.org
https://lists.openswan.org/mailman/listinfo/users
Micropayments: https://flattr.com/thing/38387/IPsec-for-Linux-made-easy
Building and Integrating Virtual Private Networks with Openswan:
http://www.amazon.com/gp/product/1904811256/104-3099591-2946327?n=283155
CONFIDENTIALITY NOTICE: The information contained in this email message is intended only for use of the intended recipient. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please immediately delete it from your system and notify the sender by replying to this email.  Thank you.