[Openswan Users] no public interfaces found on 2.6.37

[Ozai]

Dear Sirs,

This question did not seem to solve.Can someone give me the 
suggestions,thank's.

Best Regards,
Ozai
----- Original Message ----- 
From: "Tuomo Soini" <tis at foobar.fi>
To: <users at lists.openswan.org>
Sent: Wednesday, April 18, 2012 11:30 PM
Subject: Re: [Openswan Users] no public interfaces found on 2.6.37


> On Wed, 18 Apr 2012 18:21:26 +0800
> "Ozai" <ozai.tien at gmail.com> wrote:
>
>> Dear Sirs,
>>
>> I merged the openswan(2.6.37) into embedded linux(2.6.30 mips).When I
>> started the ipsec.I got the error message 'no public interfaces
>> found' as below.Please help,how can I solve this question.thank's.
>>
>> Best Regards,
>> Ozai
>>
>> # cat ipsec.conf
>>
>> config setup
>>         dumpdir=/var/run/pluto/
>>         interfaces=ipsec0=ppp0.1
>
> This would be (if your interface really is "ppp0.1" ?):
>
> interfaces="ipsec0=ppp0.1"
>
>>         oe=off
>>         protostack=klips
>>
>> conn %default
>>                 keyexchange=ike
>>                 ike=3des-md5-modp1024
>
> This would be:
>
> ike=3des-md5;modp1024
>
>>                 esp=3des-md5
>
> And this:
>
> phase2alg=3des-md5;modp1024
>
>
> -- 
> Tuomo Soini <tis at foobar.fi>
> Foobar Linux services
> +358 40 5240030
> Foobar Oy <http://foobar.fi/>
> _______________________________________________
> Users at lists.openswan.org
> https://lists.openswan.org/mailman/listinfo/users
> Micropayments: https://flattr.com/thing/38387/IPsec-for-Linux-made-easy
> Building and Integrating Virtual Private Networks with Openswan:
> http://www.amazon.com/gp/product/1904811256/104-3099591-2946327?n=283155