[Openswan Users] ipv6 ping packets are not encapsulated

[Jayasri Sangu]

-----Original Message-----
From: Paul Wouters [mailto:paul at xelerance.com] 
Sent: Friday, May 06, 2011 10:51 AM
To: Jayasri Sangu
Cc: users at openswan.org
Subject: Re: [Openswan Users] ipv6 ping packets are not encapsulated

On Wed, 4 May 2011, Jayasri Sangu wrote:

> Subject: [Openswan Users] ipv6 ping packets are not encapsulated

>    I am using  openswan-2.6.33 on embedded linux with powerpc processor.

You should use 2.6.34dr2 or git if you need ipv6 with klips. Once 2.6.34
comes out you should be okay.

pluto is not started.

Jan  1 00:42:39 (none) user.info kernel: klips_info:ipsec_init: KLIPS startup, Openswan KLIPS IPsec stack version: 2.6.34dr2
Jan  1 00:42:39 (none) user.info kernel: NET: Registered protocol family 15
Jan  1 00:42:39 (none) user.warn kernel: registered KLIPS /proc/sys/net
Jan  1 00:42:39 (none) user.info kernel: klips_info:ipsec_alg_init: KLIPS alg v=0.8.1-0 (EALG_MAX=255, AALG_MAX=251)
Jan  1 00:42:39 (none) user.info kernel: klips_info:ipsec_alg_init: calling ipsec_alg_static_init()
Jan  1 00:42:39 (none) user.warn kernel: ipsec_aes_init(alg_type=15 alg_id=12 name=aes): ret=0
Jan  1 00:42:39 (none) user.debug kernel: klips_debug: experimental ipsec_alg_AES_MAC not registered [Ok] (auth_id=0)
Jan  1 00:42:39 (none) user.warn kernel: ipsec_3des_init(alg_type=15 alg_id=3 name=3des): ret=0

Paul