[Openswan Users] How to disable Vendor id payload in openswan

[Karthikeyan Kandasamy]

Hi All,



I am using the below config in Openswan machine, I am getting the Vendor id payload from the machine with vendor id as DPD.

Could someone let me know How can I stop the Vendor id payload from the Openswan machine.



# basic configuration



config setup

        interfaces="ipsec0=eth1"

        klipsdebug=all

        plutodebug=all





include /etc/ipsec.d/examples/no_oe.conf



conn karthik



        type=          tunnel

        authby=         secret

        auth=           esp

        keyexchange=    ike

        ike=            3des-sha1-modp1024

        ikelifetime=    12000s

        pfs=            no

        esp=            3des-sha1

        salifetime=     6000s

        dpdtimeout=     10

        dpddelay=       3

        left=           10.10.1.1

        leftid=         10.10.1.1

        right=          10.10.1.42

        rightid=        10.10.1.42

        auto=           start





Thanks

Karthik

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openswan.org/pipermail/users/attachments/20110302/ad0d38e7/attachment.html