[Openswan Users] PING

[Renaldo Rocha]

Hello,

I tried putting leftsourceip=192.168.11.254 and rightsourceip=10.5.1.250 and
I didn't have result.

With this setting, some need to do NAT?
I tested some settings that I found in the forums but I didn't have result.

Anybody could I help me?
2011/6/20 Renaldo Rocha <renaldo.rocha at gmail.com>

> Hello everybody,
>
> I'm trying to connect to a VPN (CISCO) for use of some services.
> So far so good.
>  1) The connection is established;
> 2) Since the right side of the VPN (CISCO) can ping my internal IP which is
> 192.168.11.254;
>
> The problem is that I can't ping in the left side of the VPN (Openswan) to
> the right VPN(CISCO), in which IP is 10.5.1.250.
>
> How could I solve this problem?
>
> PS: I'm going crazy with this.
>
> My ipsec.conf -----------------
>
> conn XXXXXX
>         type=tunnel
>         authby=secret
>         #
>         left=190.128.137.X
>         leftsubnet=192.168.11.0/24
>         leftnexthop=%defaultroute
>         #
>         right=190.128.229.X
>         rightsubnet=10.5.1.0/24
>         rightnexthop=%defaultroute
>         #
>         auth=esp
>         ike=aes256-md5
>         esp=aes256-md5
>         keyexchange=ike
>         pfs=yes
>         #
>         auto=start
> ------------------------------
>
> My ifconfig ------------------
>
>
> eth0      Link encap:Ethernet  HWaddr 90:E6:BA:D6:08:DB
>           inet addr:192.168.1.254  Bcast:192.168.1.255  Mask:255.255.255.0
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:1282641 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:2007304 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000
>           RX bytes:179748133 (171.4 Mb)  TX bytes:2494295896 (2378.7 Mb)
>           Interrupt:27 Base address:0x8000
>
> eth1      Link encap:Ethernet  HWaddr 00:04:75:DF:47:A7
>           inet addr:190.128.137.X  Bcast:190.128.137.7
> Mask:255.255.255.252
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:1914556 errors:0 dropped:0 overruns:1 frame:0
>           TX packets:1535461 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000
>           RX bytes:2257486193 (2152.9 Mb)  TX bytes:337062517 (321.4 Mb)
>           Interrupt:16 Base address:0xcc00
>
> eth1:0    Link encap:Ethernet  HWaddr 00:04:75:DF:47:A7
>           inet addr:192.168.11.0  Bcast:192.168.11.255  Mask:255.255.255.0
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           Interrupt:16 Base address:0xcc00
>
> lo        Link encap:Local Loopback
>           inet addr:127.0.0.1  Mask:255.0.0.0
>           UP LOOPBACK RUNNING  MTU:16436  Metric:1
>           RX packets:150661 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:150661 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:0
>           RX bytes:113297829 (108.0 Mb)  TX bytes:113297829 (108.0 Mb)
>
> --------------------------------------------------
>
> My ipsec auto --status ----------------------
>
> 000 #49: "XXXXXX":500 STATE_MAIN_I4 (ISAKMP SA established);
> EVENT_SA_REPLACE in 1651s; newest ISAKMP; lastdpd=-1s(seq in:0 out:0); idle;
> import:admin initiate
> 000
>
> --------------------------------------------------
>
> --
> Ass..: Renaldo Rocha
> msn..: renaldo.rocha at gmail.com
> skype: renaldo.rocha
>



-- 
Ass..: Renaldo Rocha
msn..: renaldo.rocha at gmail.com
skype: renaldo.rocha
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openswan.org/pipermail/users/attachments/20110707/ca22ff7f/attachment.html