[Openswan Users] Eroute after rekeying

[Willie Gillespie]

On 02/17/2011 01:06 PM, Andrew Nowrot wrote:
> Hi
> I have got a question regarding my configuration.
>
> My config look like this:
>
> conn tunnel1
<snip>
>      leftsubnet=0.0.0.0/0
<snip>
>      rightsubnet=0.0.0.0/0
<snip>
> 0          0.0.0.0/0          ->  0.0.0.0/0          =>  tun0x1003xxx.yyy.vvv.zz4
> OK so a have added two additionals routes by hand and both tunnels
> started working (I can reach the resources behind first tunnel)
> 0          0.0.0.0/0          ->  aaa.bbb.ccc.ddd/30   =>
> tun0x1001 at xxx.yyy.vvv.zz2
> 0          0.0.0.0/0          ->  xxx.yyy.vvv.0/24     =>
> tun0x1001 at xxx.yyy.vvv.zz2

I'm not sure that leftsubnet and rightsubnet in your config are set 
correctly... or at least I've never used all zeros for those.