[Openswan Users] Problems using openswan and KLIPS on alias interface

[Paul Wouters]

On Wed, 27 Apr 2011, Diogo V. kersting wrote:

> # ifconfig eth0
> eth0      Link encap:Ethernet  HWaddr 08:00:27:46:48:43
> inet addr:192.168.30.250  Bcast:192.168.30.255  Mask:255.255.255.0
>
> # ifconfig eth0:1
> eth0:1    Link encap:Ethernet  HWaddr 08:00:27:46:48:43
>          inet addr:192.168.30.251  Bcast:192.168.30.255  Mask:255.255.255.0
>          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>
> Here is the config of each interface:
> -----ipsec.conf eth0 -----
> version 2.0
>
> config setup
>    interfaces="ipsec0=eth0"

Use:    interfaces="ipsec0=eth0 ipsec1=eth0:1"

Paul