[Openswan Users] net-to-net with multiple subnets, unrouted

[Paul Overton]

Paul,

Does the command below work with KLIPS as well as NETKEY?

Regards Paul


Because your gateway automatically uses its "nearest IP" to talk to the
remote
subnet, which in your case is your public ip. This public ip is not part
of the
tunnel, so it fails. Add leftsourceip=YourInternalIP and it will create
the
proper route for you to use its internal IP to talk to the remote
subnet.

Paul
_______________________________________________
Users at openswan.org
http://lists.openswan.org/mailman/listinfo/users
Micropayments: https://flattr.com/thing/38387/IPsec-for-Linux-made-easy
Building and Integrating Virtual Private Networks with Openswan: 
http://www.amazon.com/gp/product/1904811256/104-3099591-2946327?n=283155

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


-- 
This message has been scanned for viruses and
dangerous content by Trusted Management Limited, and is
believed to be clean.