[Openswan Users] esp string error: enc_alg not found

[Steve Zeng]

Right. I recreated a new preshared key already. Thanks, paul. 

Steve

-----Original Message-----
From: Paul Wouters [mailto:paul at xelerance.com] 
Sent: May 18, 2010 9:55 AM
To: Steve Zeng
Cc: users at openswan.org
Subject: RE: [Openswan Users] esp string error: enc_alg not found

On Tue, 18 May 2010, Steve Zeng wrote:

> Unfortunetely there is nothing I can configure on amazon side. All I got is the following instruction. So I think there maybe something missing on my side. Because I did not figured out the tunnel interface part yet. i.e. there is no tunnel interface up. or maybe I am in a dead corner?

As stated numerous times now. Openswan will NOT GIVE you a tunnel interface.

>  - Authentication Method    : Pre-Shared Key
>  - Pre-Shared Key           : jjwzQIHrPjr.ec31DU_ZGvucsE5lVikIZDZcqAkm

Anyone with access to the mailing list can now connect to that machine. I suggest
you immediately contact the remote sysadmin and change the Pre-Shared Key!!

> The Customer Gateway inside IP address should be configured on your tunnel
> interface.

That will require a leftsubnet= option on your end.

Paul