[Openswan Users] Openswan & xl2tpd

jens vermand jvermad at gmail.com
Tue Jun 29 07:57:56 EDT 2010


Hallo all,

I think I have issue with xl2tpd, but not sue about it and don,t know
what to do about it.
Do you know what is the issue, because I get disconnect after 10 sec
or no connection at all.

Thanks
Jens Vermand

Here is the log:

==> /var/log/daemon.log <==
Jun 29 13:42:40 vpnserver xl2tpd[2055]: control_finish: Peer requested
tunnel 10 twice, ignoring second one.
Jun 29 13:42:40 vpnserver xl2tpd[2055]: Connection established to
vpnclient-Macbook, 54356.  Local: 6457, Remote: 10 (ref=0/0).  LNS
session is 'default'
Jun 29 13:42:40 vpnserver xl2tpd[2055]: start_pppd: I'm running:
Jun 29 13:42:40 vpnserver xl2tpd[2055]: "/usr/sbin/pppd"
Jun 29 13:42:40 vpnserver xl2tpd[2055]: "passive"
Jun 29 13:42:40 vpnserver xl2tpd[2055]: "nodetach"
Jun 29 13:42:40 vpnserver xl2tpd[2055]: "vpnserver IP-address:91.x.x.x"
Jun 29 13:42:40 vpnserver xl2tpd[2055]: "file"
Jun 29 13:42:40 vpnserver xl2tpd[2055]: "/etc/ppp/options.l2tpd"
Jun 29 13:42:40 vpnserver xl2tpd[2055]: "/dev/pts/1"
Jun 29 13:42:40 vpnserver xl2tpd[2055]: Call established with
vpnclient-Macbook, Local: 51220, Remote: 3893, Serial: 1

==> /var/log/mail.log <==
Jun 29 13:42:41 vpnserver postfix/master[1538]: reload -- version
2.6.5, configuration /etc/postfix

==> /var/log/daemon.log <==
Jun 29 13:43:00 vpnserver xl2tpd[2055]: udp_xmit failed with err=-1:No
route to host

==> /var/log/auth.log <==
Jun 29 13:43:01 vpnserver pluto[1847]: "L2TP-PSK-NAT"[14]
vpnclient-Macbook #27: received Delete SA(0x01df2763) payload:
deleting IPSEC State #28
Jun 29 13:43:01 vpnserver pluto[1847]: "L2TP-PSK-NAT"[14]
vpnclient-Macbook #27: received and ignored informational message
Jun 29 13:43:01 vpnserver pluto[1847]: "L2TP-PSK-NAT"[14]
vpnclient-Macbook #27: received Delete SA payload: deleting ISAKMP
State #27
Jun 29 13:43:01 vpnserver pluto[1847]: "L2TP-PSK-NAT"[14]
vpnclient-Macbook: deleting connection "L2TP-PSK-NAT" instance with
peer vpnclient-Macbook {isakmp=#0/ipsec=#0}
Jun 29 13:43:01 vpnserver pluto[1847]: packet from
vpnclient-Macbook:4500: received and ignored informational message

==> /var/log/daemon.log <==
Jun 29 13:43:01 vpnserver xl2tpd[2055]: last message repeated 95 times
Jun 29 13:43:01 vpnserver xl2tpd[2055]: child_handler : pppd exited
for call 3893 with code 15
Jun 29 13:43:01 vpnserver xl2tpd[2055]: call_close: Call 51220 to
vpnclient-Macbook disconnected
Jun 29 13:43:01 vpnserver xl2tpd[2055]: result_code_avp: result code
out of range (768 51220 14).  Ignoring.
Jun 29 13:43:01 vpnserver xl2tpd[2055]: control_finish: Connection
closed to vpnclient-Macbook, serial 1 ()
Jun 29 13:43:01 vpnserver xl2tpd[2055]: Terminating pppd: sending TERM
signal to pid 6745
Jun 29 13:43:01 vpnserver xl2tpd[2055]: pppd 6745 successfully terminated
Jun 29 13:43:01 vpnserver xl2tpd[2055]: result_code_avp: result code
out of range (256 51220 14).  Ignoring.
Jun 29 13:43:01 vpnserver xl2tpd[2055]: control_finish: Peer tried to
disconnect without specifying result code.
Jun 29 13:43:01 vpnserver xl2tpd[2055]: get_call: can't find call
51220 in tunnel 6457#012 (ref=0/0)
Jun 29 13:43:01 vpnserver xl2tpd[2055]: check_control: Received out of
order control packet on tunnel 10 (got 4, expected 6)


More information about the Users mailing list