[Openswan Users] Road warrior setup for Windows 7 on OpenSwan 2.4.10

[Bob Miller]

In my experience, the no "connection is known for" error indicates that
the conn section does not adequately describe the network situation.
The only thing that I can think that might improve it, though, is a
leftsubnet= clause in your stanza.  Just a guess....
> > 
> > > conn rw-net
> > >         #
> > >         # Use a certificate. Disable Perfect Forward Secrecy.
> > >         #
> > >         authby=rsasig
> > >         rekey=no
> > >         pfs=no
> > >         left=%defaultroute
> > >         leftupdown=/lib/ipsec/_updown_x509
> > >         leftprotoport=udp/1701
> > >         rightprotoport=udp/1701
> > >         leftrsasigkey=%cert
> > >         leftcert=mycert.pem
> > >         rightrsasigkey=%cert
> > >         right=%any
> > >         rightca=%same
> > >         auto=add
> > >         keyingtries=3
> > >         keylife=5h
> > >         ikelifetime=5h
> > >         rightsubnet=vhost:%priv,%no
> >  Thanks, Danilo
> > 
> > 
> > **
> > 
> > _______________________________________________
> > Users at openswan.org
> > http://lists.openswan.org/mailman/listinfo/users
> > Building and Integrating Virtual Private Networks with Openswan: 
> > http://www.amazon.com/gp/product/1904811256/104-3099591-2946327?n=283155
Bob Miller
334-7117/633-3760
http://computerisms.ca
bob at computerisms.ca
Network, Internet, Server,
and Open Source Solutions