[Openswan Users] Openswan doesn't starts because pluto is down

[Jorge Jimenez]

Hi Paul,

Here you have gdb output from core file:

[root at pross-mon01 ipsec]# gdb /usr/libexec/ipsec/pluto /var/run/pluto/core.25338
GNU gdb Fedora (6.8-37.el5)
Copyright (C) 2008 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.  Type "show copying"
and "show warranty" for details.
This GDB was configured as "i386-redhat-linux-gnu"...

warning: the debug information found in "/usr/lib/debug//usr/libexec/ipsec/pluto.debug" does not match "/usr/libexec/ipsec/pluto" (CRC mismatch).


warning: the debug information found in "/usr/lib/debug/usr/libexec/ipsec/pluto.debug" does not match "/usr/libexec/ipsec/pluto" (CRC mismatch).

(no debugging symbols found)

warning: Can't read pathname for load map: Input/output error.

warning: .dynamic section for "/usr/lib/libnspr4.so" is not at the expected address

warning: difference appears to be caused by prelink, adjusting expectations

warning: .dynamic section for "/usr/lib/libnss3.so" is not at the expected address

warning: difference appears to be caused by prelink, adjusting expectations

warning: .dynamic section for "/lib/libcrypt.so.1" is not at the expected address

warning: difference appears to be caused by prelink, adjusting expectations

warning: .dynamic section for "/lib/libc.so.6" is not at the expected address

warning: difference appears to be caused by prelink, adjusting expectations

warning: .dynamic section for "/usr/lib/libnssutil3.so" is not at the expected address

warning: difference appears to be caused by prelink, adjusting expectations

warning: .dynamic section for "/usr/lib/libplc4.so" is not at the expected address

warning: difference appears to be caused by prelink, adjusting expectations

warning: .dynamic section for "/usr/lib/libplds4.so" is not at the expected address

warning: difference appears to be caused by prelink, adjusting expectations

warning: .dynamic section for "/lib/ld-linux.so.2" is not at the expected address

warning: difference appears to be caused by prelink, adjusting expectations

warning: the debug information found in "/usr/lib/debug//usr/libexec/ipsec/pluto.debug" does not match "/usr/libexec/ipsec/pluto" (CRC mismatch).


warning: the debug information found in "/usr/lib/debug/usr/libexec/ipsec/pluto.debug" does not match "/usr/libexec/ipsec/pluto" (CRC mismatch).

(no debugging symbols found)
Loaded symbols for /usr/libexec/ipsec/pluto
Reading symbols from /usr/lib/libnspr4.so...(no debugging symbols found)...done.
Loaded symbols for /usr/lib/libnspr4.so
Reading symbols from /usr/lib/libnss3.so...(no debugging symbols found)...done.
Loaded symbols for /usr/lib/libnss3.so
Reading symbols from /usr/lib/libfipscheck.so.1...(no debugging symbols found)...done.
Loaded symbols for /usr/lib/libfipscheck.so.1
Reading symbols from /lib/libcrypt.so.1...(no debugging symbols found)...done.
Loaded symbols for /lib/libcrypt.so.1
Reading symbols from /usr/lib/sse2/libgmp.so.3...done.
Loaded symbols for /usr/lib/sse2/libgmp.so.3
Reading symbols from /lib/libc.so.6...done.
Loaded symbols for /lib/libc.so.6
Reading symbols from /lib/libpthread.so.0...done.
Loaded symbols for /lib/libpthread.so.0
Reading symbols from /lib/libdl.so.2...done.
Loaded symbols for /lib/libdl.so.2
Reading symbols from /usr/lib/libnssutil3.so...done.
Loaded symbols for /usr/lib/libnssutil3.so
Reading symbols from /usr/lib/libplc4.so...done.
Loaded symbols for /usr/lib/libplc4.so
Reading symbols from /usr/lib/libplds4.so...done.
Loaded symbols for /usr/lib/libplds4.so
Reading symbols from /lib/ld-linux.so.2...done.
Loaded symbols for /lib/ld-linux.so.2
Reading symbols from /usr/lib/libsoftokn3.so...done.
Loaded symbols for /usr/lib/libsoftokn3.so
Reading symbols from /usr/lib/libfreebl3.so...done.
Loaded symbols for /usr/lib/libfreebl3.so

Core was generated by `/usr/libexec/ipsec/pluto --nofork --secretsfile /etc/ipse
Program terminated with signal 11, Segmentation fault.
[New process 25338]
[New process 25344]
#0  0x0052a32a in ?? () from /usr/libexec/ipsec/pluto
(gdb) bt full
#0  0x0052a32a in ?? () from /usr/libexec/ipsec/pluto
No symbol table info available.
#1  0x0052e2cc in ?? () from /usr/libexec/ipsec/pluto
No symbol table info available.
#2  0x004fb4be in main_outI1 () from /usr/libexec/ipsec/pluto
No symbol table info available.
#3  0x004f3d4b in ?? () from /usr/libexec/ipsec/pluto
No symbol table info available.
#4  0x004dfc39 in ?? () from /usr/libexec/ipsec/pluto
No symbol table info available.
#5  0x004e25aa in ?? () from /usr/libexec/ipsec/pluto
No symbol table info available.
#6  0x0051a742 in ?? () from /usr/libexec/ipsec/pluto
No symbol table info available.
#7  0x0051b754 in ?? () from /usr/libexec/ipsec/pluto
No symbol table info available.
#8  0x004ee33d in ?? () from /usr/libexec/ipsec/pluto
No symbol table info available.
#9  0x004eb064 in main () from /usr/libexec/ipsec/pluto
No symbol table info available.

Do you need something else?

Thanks

Jorge Jiménez Miguélez
Avinguda Diagonal, 605 - 4ª Planta
08028 - Barcelona
Tel.: 902 01 35 34 - Móvil: 669 83 08 76
http://www.pross.com

-----Mensaje original-----
De: Jorge Jimenez 
Enviado el: lunes, 11 de enero de 2010 22:25
Para: Paul Wouters
CC: Tuomo Soini; users at openswan.org; Ondrej Valousek; Jorge Jimenez
Asunto: RE: [Openswan Users] Openswan doesn't starts because pluto is down

Hi Paul,

How can I generate a core file? And how I run gdb "bt full" on it?

Thanks and kind regards

Jorge Jiménez Miguélez
Avinguda Diagonal, 605 - 4ª Planta
08028 - Barcelona
Tel.: 902 01 35 34 - Móvil: 669 83 08 76
http://www.pross.com


-----Mensaje original-----
De: Paul Wouters [mailto:paul at xelerance.com] 
Enviado el: lunes, 11 de enero de 2010 21:36
Para: Jorge Jimenez
CC: Tuomo Soini; users at openswan.org; Ondrej Valousek
Asunto: RE: [Openswan Users] Openswan doesn't starts because pluto is down

On Mon, 11 Jan 2010, Jorge Jimenez wrote:

> Hi Paul
>
> Nothing.

Then you'll have to install the debug packages, enable dumpdir=/var/run/pluto/ in
ipsec.conf and generate a core file, and run a gdb "bt full" on it to give us the
information of the crasher.

Paul

> Thanks and kind regards
>
> Jorge Jiménez Miguélez
> Avinguda Diagonal, 605 - 4ª Planta
> 08028 - Barcelona
> Tel.: 902 01 35 34 - Móvil: 669 83 08 76
> http://www.pross.com
>
> -----Mensaje original-----
> De: Paul Wouters [mailto:paul at xelerance.com]
> Enviado el: lunes, 11 de enero de 2010 20:42
> Para: Jorge Jimenez
> CC: Tuomo Soini; users at openswan.org; Ondrej Valousek
> Asunto: RE: [Openswan Users] Openswan doesn't starts because pluto is down
>
> On Mon, 11 Jan 2010, Jorge Jimenez wrote:
>
>> Finally I uninstall openswan and install it again. Now it starts but pluto is logging a segmentation fault.
>> This is my messages log output:
>
> Show me the output of:
>
> grep ASSERTION /var/log/*
>
> Paul
>
>