[Openswan Users] IPSec VPN Tunnel Connection ...Please Help.....

[emil at stoynev.us]

Hello, I am getting this error when I try to bring up IPSec Tunnel... Looking
for someone help.. Thanks...
[quote]Starting connection with command /usr/sbin/ipsec auto --up
'paycode-to-vivacom' .. 104 "paycode-to-vivacom" #7: STATE_MAIN_I1: initiate 003
"paycode-to-vivacom" #7: received Vendor ID payload
[draft-ietf-ipsec-nat-t-ike-02_n] method set to=106 003 "paycode-to-vivacom" #7:
ignoring Vendor ID payload [FRAGMENTATION c0000000] 106 "paycode-to-vivacom" #7:
STATE_MAIN_I2: sent MI2, expecting MR2 003 "paycode-to-vivacom" #7: received
Vendor ID payload [Cisco-Unity] 003 "paycode-to-vivacom" #7: received Vendor ID
payload [XAUTH] 003 "paycode-to-vivacom" #7: ignoring unknown Vendor ID payload
[c5e228ecee81618df6d2cd7eef3b0bb4] 003 "paycode-to-vivacom" #7: ignoring Vendor
ID payload [Cisco VPN 3000 Series] 003 "paycode-to-vivacom" #7: NAT-Traversal:
Result using draft-ietf-ipsec-nat-t-ike-02/03: no NAT detected 108
"paycode-to-vivacom" #7: STATE_MAIN_I3: sent MI3, expecting MR3 010
"paycode-to-vivacom" #7: STATE_MAIN_I3: retransmission; will wait 20s for
response 003 "paycode-to-vivacom" #7: discarding duplicate packet; already
STATE_MAIN_I3 003 "paycode-to-vivacom" #7: discarding duplicate packet; already
STATE_MAIN_I3 003 "paycode-to-vivacom" #7: discarding duplicate packet; already
STATE_MAIN_I3 010 "paycode-to-vivacom" #7: STATE_MAIN_I3: retransmission; will
wait 40s for response 003 "paycode-to-vivacom" #7: next payload type of ISAKMP
Hash Payload has an unknown value: 31 003 "paycode-to-vivacom" #7: malformed
payload in packet 031 "paycode-to-vivacom" #7: max number of retransmissions (2)
reached STATE_MAIN_I3. Possible authentication failure: no acceptable response
to our first encrypted message 000 "paycode-to-vivacom" #7: starting keying
attempt 2 of at most 3, but releasing whack[/quote] ipsec.conf [quote]conn
paycode-to-vivacom auth=esp authby=secret auto=start esp=3des-168 ike=3des-md5
ikelifetime=8h keyexchange=ike keyingtries=3 keylife=1h left=95.43.208.250
leftid=95.43.208.250 leftnexthop=95.43.208.249 pfs=yes right=212.39.72.21
rightsubnet=10.16.0.0/24 type=tunnel[/quote] [b]PLESE, any help or suggestions
will be very appreciated![/b] >>>>>>> [b]Connection Configuration >>>[/b]
[url]http://i48.tinypic.com/1823ba.jpg[/url]


The OS is Debian Squeeze



paycode:~# ipsec verify
Checking your system to see if IPsec got installed and started correctly:
Version check and ipsec on-path                                 [OK]
Linux Openswan U2.6.23/K2.6.32-trunk-686 (netkey)
Checking for IPsec support in kernel                            [OK]
NETKEY detected, testing for disabled ICMP send_redirects       [OK]
NETKEY detected, testing for disabled ICMP accept_redirects     [OK]
Checking for RSA private key (/etc/ipsec.secrets)               [OK]
Checking that pluto is running                                  [OK]
Pluto listening for IKE on udp 500                              [OK]
Pluto listening for NAT-T on udp 4500                           [OK]
Two or more interfaces found, checking IP forwarding            [OK]
Checking NAT and MASQUERADEing                                  [OK]
Checking for 'ip' command                                       [OK]
Checking for 'iptables' command                                 [OK]
Opportunistic Encryption Support                                [DISABLED]
paycode:~#
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openswan.org/pipermail/users/attachments/20100219/ca6fd609/attachment.html