[Openswan Users] home router with ipsec/l2tp server and PPPoE WAN mode

[Murat Sezgin]

Let me explain my setups with some simple text diagrams.

The first setup: SUCCESS

VPN Router <W>----wired(static or dhcp)------<W>NAT-Router
<<<<<wireless (IPHONE)

Note: For DHCP wired connection I am using a DHCP server between the routers.


The second setup:FAIL

VPN Router<W>PPPoE--------- Internet               Internet---------3G-IPHONE


I hope it is a routing issue. Should I also concern about the below message?

road-warrior-host"[1] 166.205.139.100 #4: responding to Main Mode
from unknown peer 166.205.139.100

Regards,
Murat


On Fri, Feb 19, 2010 at 7:49 PM, Paul Wouters <paul at xelerance.com> wrote:
> On Fri, 19 Feb 2010, Murat Sezgin wrote:
>
>> I am running the ipsec/l2tp in an openwrt based home router. With the
>> DHCP and Static WAN mode, I can connect to the router from my iphone
>> behind a router. Then I tried to run PPPoE for the WAN mode and got a
>> public IP address. I am trying to connect from my iphone again over
>> 3G, but I get the following errors.
>
> I'm not sure i understand those two situations at all from your
> description.
>
>> ERROR: asynchronous network error report on ppp0 (sport=500) for
>> message to 166.205.139.100 port 42184, complainant 75.11.245.210: No
>> route to host [errno 113, origin ICMP type 3 code 13 (not
>> authenticated)]
>
> Something is very unhappy about the routes, but only you know the IP's
> involved and can think which of these units cannot route and perhaps
> think of a reason why.
>
> Paul
>



-- 
Murat Sezgin