[Openswan Users] Simplest ipsec config with PSK insists that I have no connection authorized with policy=PSK

JP CR jprollerskate at hotmail.com
Fri Dec 31 21:34:51 EST 2010


Same result. Same error.
I can comment out the rest of the connections and i still get the same error.

In fact I can comment out the entire l2tp-psk.conf include in ipsec.conf and I still get the same error. Not sure what this means..


> Date: Fri, 31 Dec 2010 19:05:54 -0700
> From: wgillespie+openswan at es2eng.com
> To: jprollerskate at hotmail.com
> CC: users at openswan.org
> Subject: Re: [Openswan Users] Simplest ipsec config with PSK insists that I have no connection authorized with policy=PSK
> 
> As a quick test, what happens if you comment out your 
> "passthrough-for-non-l2tp" connection?  Is it able to find a connection 
> to use then?
> 
> On 12/31/2010 05:58 PM, JP CR wrote:
> > Hello,
> >
> > Making a primitive test.
> >
> > I have a home LAN, a two machines one WinXP and other Ubuntu 10.1 v
> > 1:2.6.23+dfsg-1ubuntu1 kernel: 2.6.32-17-generic
> > WinXP IP is 192.170.1.3
> > Ubuntu: 192.170.1.4
> > Gateway for both is 192.170.1.1
> > No firewalls installed on either machines.
> >
> > a.) iam following guidance of:
> > http://rootmanager.com/ubuntu-ipsec-l2tp-windows-domain-auth/setting-up-openswan-xl2tpd-with-native-windows-clients.html
> > b.) This is my ipsec.conf (comments removed):
> > version 2.0 # conforms to second version of ipsec.conf specification
> >
> > # basic configuration
> > config setup
> > nat_traversal=yes
> > virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12
> > oe=off
> > protostack=netkey
> >
> > include /etc/ipsec.d/l2tp-psk.conf
> >
> > c.) This is my /etc/ipsec.d/l2tp-psk.conf
> >
> > conn L2TP-PSK-NAT
> > rightsubnet=vhost:%priv
> > also=L2TP-PSK-noNAT
> >
> > conn L2TP-PSK-noNAT
> > authby=secret
> > pfs=no
> > auto=add
> > keyingtries=3
> > # we cannot rekey for %any, let client rekey
> > rekey=no
> > # Set ikelifetime and keylife to same defaults windows has
> > ikelifetime=8h
> > keylife=1h
> > # l2tp-over-ipsec is transport mode
> > type=transport
> > left=192.170.1.1
> > leftprotoport=17/1701
> > right=%any
> > rightprotoport=17/0
> >
> > conn passthrough-for-non-l2tp
> > type=passthrough
> > left=192.170.1.4
> > leftnexthop=192.170.1.1
> > right=0.0.0.0/24
> > rightsubnet=0.0.0.0/0
> > auto=route
> >
> > d.) THis is my /etc/ipsec.secrets
> >
> > 192.170.1.4 %any: PSK "password"
> >
> >
> > Iam using the native WinXP VPN connection to test, i made sure that i
> > set the preshared key and told it to use a PSK, however i keep getting
> > that error: pluto[7752]: packet from 192.170.1.3:500: initial Main Mode
> > message received on 192.170.1.4:500 but no connection has been
> > authorized with policy=PSK I expect to see: |STATE_QUICK_R2: IPsec SA
> > established|
> >
> > I tried searching google, made sure right is %any... and tried lots of
> > things but no joy.
> >
> > Thanks
> > Gunther
> >
> >
> >
> >
> >
> >
> > _______________________________________________
> > Users at openswan.org
> > http://lists.openswan.org/mailman/listinfo/users
> > Micropayments: https://flattr.com/thing/38387/IPsec-for-Linux-made-easy
> > Building and Integrating Virtual Private Networks with Openswan:
> > http://www.amazon.com/gp/product/1904811256/104-3099591-2946327?n=283155
> 
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openswan.org/pipermail/users/attachments/20110101/1580c64d/attachment-0001.html 


More information about the Users mailing list