[Openswan Users] multiple subnets on one side of the vpn

[Gary Long]

Hi :)

Just to tell you that the vpn tunnel is working perfectly ^^

Thank everyone for your help :)

Gary

Le 13/12/2010 16:36, Gary Long a écrit :
> Thank you Markus&  Willie :)
>
> The test of the vpn is scheduled for tomorrow. I'll tell you if it works :)
>
> Gary
>
> Le 13/12/2010 11:23, Markus Ewald a écrit :
>>     On 12/13/2010 10:09 AM, Gary Long wrote:
>>> Hello :)
>>>
>>> I'm going to create a vpn between two sites and the network
>>> administrator of the other site sent me informations about the available
>>> subnets on his side of the tunnel. He gave me two subnetworks :
>>> 164.129.86.253/32  and 164.129.86.55/32
>>>
>>> How can I configure this in openSwan ? Can I put 2 subnets in the
>>> rightsubnet option of the ipsec.conf file ? What is the correct synthax ?
>> I'm pretty new to OpenSwan myself, but as far as I know, you can either
>> set up to separate connections, one for each subnet, or you can use the
>> 'rightsubnets' option instead of 'rightsubnet' which I think makes
>> OpenSwan do the same automatically (it's not in my manpage, but it's
>> mentioned eg. hee:
>> http://lists.openswan.org/pipermail/users/2009-May/016573.html)
>>
>>> Thank you :)
>> -Markus-
>>
>> _______________________________________________
>> Users at openswan.org
>> http://lists.openswan.org/mailman/listinfo/users
>> Micropayments: https://flattr.com/thing/38387/IPsec-for-Linux-made-easy
>> Building and Integrating Virtual Private Networks with Openswan:
>> http://www.amazon.com/gp/product/1904811256/104-3099591-2946327?n=283155
> _______________________________________________
> Users at openswan.org
> http://lists.openswan.org/mailman/listinfo/users
> Micropayments: https://flattr.com/thing/38387/IPsec-for-Linux-made-easy
> Building and Integrating Virtual Private Networks with Openswan:
> http://www.amazon.com/gp/product/1904811256/104-3099591-2946327?n=283155