[Openswan Users] OpenSwan on ubuntu

[Hammad]

Hi Paul,

interfaces=%defaultroute is set. service ipsec start works flawlessly.

Here is the output of commands...
*root at vps:/usr/local# modprobe ipsec*
WARNING: Deprecated config file /etc/modprobe.conf, all config files belong
into /etc/modprobe.d/.
FATAL: Module ipsec not found.

*root at vps:/usr/local# modprobe af_key*
WARNING: Deprecated config file /etc/modprobe.conf, all config files belong
into /etc/modprobe.d/.
FATAL: Module af_key not found.

*root at vps:/usr/local# ipsec --version*
Linux Openswan U2.6.31/K(no kernel code presently loaded)
See `ipsec --copyright' for copyright information.


Regards,
Hammad

On Fri, Dec 3, 2010 at 2:42 AM, Paul Wouters <paul at xelerance.com> wrote:

> On Fri, 3 Dec 2010, Hammad wrote:
>
>  root at vps:~# ipsec verify
>> Checking your system to see if IPsec got installed and started correctly:
>> Version check and ipsec on-path                                 [OK]
>> Linux Openswan U2.6.31/K(no kernel code presently loaded)
>> Checking for IPsec support in kernel                            [FAILED]
>> SAref kernel support                                            [N/A]
>> Checking that pluto is running                                  [OK]
>> Pluto listening for IKE on udp 500                              [FAILED]
>> Pluto listening for NAT-T on udp 4500                           [FAILED]
>>
>
> Having pluto running but no loaded IPsec stack is very strange?
>
> That normally only happens during specific tests with interfaces=%none.
> If you have that, remove the interfaces= line. If you dont have that,
> confirm
> that you do not have an ipsec stack:
>
> modprobe ipsec
> modprobe af_key
> ipsec --version
>
> Paul
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openswan.org/pipermail/users/attachments/20101203/6a2de332/attachment-0001.html