[Openswan Users] Can't connect to VPN Server

[Adam Wu]

I install the openswan in Linux, and connect to the VPN Server but fail.What is wrong with it?The connect message is:002 "wan" #1: initiating Main Mode
104 "wan" #1: STATE_MAIN_I1: initiate
003 "wan" #1: ignoring Vendor ID payload [strongSwan 4.0.7]
003 "wan" #1: received Vendor ID payload [XAUTH]
003 "wan" #1: received Vendor ID payload [Dead Peer Detection]
003 "wan" #1: received Vendor ID payload [RFC 3947] method set to=109
002 "wan" #1: enabling possible NAT-traversal with method 4
002 "wan" #1: transition from state STATE_MAIN_I1 to state STATE_MAIN_I2
106 "wan" #1: STATE_MAIN_I2: sent MI2, expecting MR2
003 "wan" #1: NAT-Traversal: Result using RFC 3947 (NAT-Traversal): i am NATed
002 "wan" #1: I am sending my cert
002 "wan" #1: I am sending a certificate request
002 "wan" #1: transition from state STATE_MAIN_I2 to state STATE_MAIN_I3
108 "wan" #1: STATE_MAIN_I3: sent MI3, expecting MR3
003 "wan" #1: next payload type of ISAKMP Hash Payload has an unknown value: 217
003 "wan" #1: malformed payload in packet
002 "wan" #1: sending notification PAYLOAD_MALFORMED to 202.118.7.98:4500
003 "wan" #1: discarding duplicate packet; already STATE_MAIN_I3


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openswan.org/pipermail/users/attachments/20100831/95c52597/attachment.html