[Openswan Users] Configuration question

[Paul Wouters]

On Fri, 27 Aug 2010, Douglas Caro wrote:

> conn CompanyName
>        auto=start
>        left=192.168.5.26
>        leftid=ValidIP
>        leftnexthop=192.168.5.1
>        leftsubnet=192.168.5.0/24
>        right=CompanyIP
>        rightsubnet=10.0.0.0/8
>        authby=secret
>        pfs=yes
>        type=tunnel
>
> ================
>
> In the syslog, I have:
>
> kernel: NET: Unregistered protocol family 15
> ipsec_setup: ...Openswan IPsec stopped
> ipsec_setup: Stopping Openswan IPsec...
> kernel: NET: Registered protocol family 15
> kernel: padlock: VIA PadLock not detected.
> kernel: Initializing IPsec netlink socket
> ipsec_setup: NETKEY on eth0 192.168.5.26/255.255.255.128 broadcast
> 192.168.5.127
> ipsec_setup: ...Openswan IPsec started
> ipsec_setup: Starting Openswan IPsec 2.4.12...
> ipsec__plutorun: 104 "CompanyName" #1: STATE_MAIN_I1: initiate
> ipsec__plutorun: ...could not start conn "CompanyName"

These are not the actual logs, just the startup logs. Look for log
entries with "pluto" in it. Usually /var/log/secure or /var/log/auth*

Paul