[Openswan Users] Setting leftsubnet stops xl2tpd from working

[George Pollard]

On 10 August 2010 12:07, Randy Wyatt <rwyatt at nvtl.com> wrote:
> Have you turned on debugging for xl2tpd ?

Here is the output for xl2tpd with all the 'debug x = yes' options
enabled (I've removed the raw packet dumps):

	setsockopt recvref[22]: Protocol not available
	This binary does not support kernel L2TP.
	xl2tpd version xl2tpd-1.2.5 started on MY_VPN PID:9362
	Written by Mark Spencer, Copyright (C) 1998, Adtran, Inc.
	Forked by Scott Balmos and David Stipp, (C) 2001
	Inherited by Jeff McAdams, (C) 2002
	Forked again by Xelerance (www.xelerance.com) (C) 2006
	Listening on IP address 0.0.0.0, port 1701
	network_thread: recv packet from MY_CLIENT_IP, size = 106, tunnel =
0, call = 0 ref=0 refhim=0

	get_call: allocating new tunnel for host MY_CLIENT_IP, port 1701.
	handle_avps: handling avp's for tunnel 46540, call 0
	message_type_avp: message type 1 (Start-Control-Connection-Request)
	protocol_version_avp: peer is using version 1, revision 0.
	framing_caps_avp: supported peer frames: sync
	bearer_caps_avp: supported peer bearers:
	firmware_rev_avp: peer reports firmware version 1537 (0x0601)
	hostname_avp: peer reports hostname 'MY_CLIENT'
	vendor_avp: peer reports vendor 'Microsoft'
	assigned_tunnel_avp: using peer's tunnel 3
	receive_window_size_avp: peer wants RWS of 8.  Will use flow control.
	control_finish: message type is Start-Control-Connection-Request(1).
Tunnel is 3, call is 0.

	control_finish: sending SCCRP
	network_thread: recv packet from MY_CLIENT_IP, size = 106, tunnel =
0, call = 0 ref=0 refhim=0

	get_call: allocating new tunnel for host MY_CLIENT_IP, port 1701.
	handle_avps: handling avp's for tunnel 8206, call 0
	message_type_avp: message type 1 (Start-Control-Connection-Request)
	protocol_version_avp: peer is using version 1, revision 0.
	framing_caps_avp: supported peer frames: sync
	bearer_caps_avp: supported peer bearers:
	firmware_rev_avp: peer reports firmware version 1537 (0x0601)
	hostname_avp: peer reports hostname 'MY_CLIENT'
	vendor_avp: peer reports vendor 'Microsoft'
	assigned_tunnel_avp: using peer's tunnel 3
	receive_window_size_avp: peer wants RWS of 8.  Will use flow control.
	control_finish: message type is Start-Control-Connection-Request(1).
Tunnel is 3, call is 0.
	control_finish: Peer requested tunnel 3 twice, ignoring second one.
	build_fdset: closing down tunnel 8206
	network_thread: recv packet from MY_CLIENT_IP, size = 106, tunnel =
0, call = 0 ref=0 refhim=0

	get_call: allocating new tunnel for host MY_CLIENT_IP, port 1701.
	handle_avps: handling avp's for tunnel 18888, call 19870
	message_type_avp: message type 1 (Start-Control-Connection-Request)
	protocol_version_avp: peer is using version 1, revision 0.
	framing_caps_avp: supported peer frames: sync
	bearer_caps_avp: supported peer bearers:
	firmware_rev_avp: peer reports firmware version 1537 (0x0601)
	hostname_avp: peer reports hostname 'MY_CLIENT'
	vendor_avp: peer reports vendor 'Microsoft'
	assigned_tunnel_avp: using peer's tunnel 3
	receive_window_size_avp: peer wants RWS of 8.  Will use flow control.
	control_finish: message type is Start-Control-Connection-Request(1).
Tunnel is 3, call is 0.
	control_finish: Peer requested tunnel 3 twice, ignoring second one.
	build_fdset: closing down tunnel 18888
	network_thread: select timeout
	network_thread: select timeout
	network_thread: select timeout
	network_thread: select timeout
	network_thread: recv packet from MY_CLIENT_IP, size = 106, tunnel =
0, call = 0 ref=0 refhim=0

	get_call: allocating new tunnel for host MY_CLIENT_IP, port 1701.
	handle_avps: handling avp's for tunnel 28807, call 3715
	message_type_avp: message type 1 (Start-Control-Connection-Request)
	protocol_version_avp: peer is using version 1, revision 0.
	framing_caps_avp: supported peer frames: sync
	bearer_caps_avp: supported peer bearers:
	firmware_rev_avp: peer reports firmware version 1537 (0x0601)
	hostname_avp: peer reports hostname 'MY_CLIENT'
	vendor_avp: peer reports vendor 'Microsoft'
	assigned_tunnel_avp: using peer's tunnel 3
	receive_window_size_avp: peer wants RWS of 8.  Will use flow control.
	control_finish: message type is Start-Control-Connection-Request(1).
Tunnel is 3, call is 0.
	control_finish: Peer requested tunnel 3 twice, ignoring second one.
	build_fdset: closing down tunnel 28807
	network_thread: select timeout
	Maximum retries exceeded for tunnel 46540.  Closing.
	network_thread: recv packet from MY_CLIENT_IP, size = 106, tunnel =
0, call = 0 ref=0 refhim=0

	get_call: allocating new tunnel for host MY_CLIENT_IP, port 1701.
	handle_avps: handling avp's for tunnel 18015, call 0
	message_type_avp: message type 1 (Start-Control-Connection-Request)
	protocol_version_avp: peer is using version 1, revision 0.
	framing_caps_avp: supported peer frames: sync
	bearer_caps_avp: supported peer bearers:
	firmware_rev_avp: peer reports firmware version 1537 (0x0601)
	hostname_avp: peer reports hostname 'MY_CLIENT'
	vendor_avp: peer reports vendor 'Microsoft'
	assigned_tunnel_avp: using peer's tunnel 3
	receive_window_size_avp: peer wants RWS of 8.  Will use flow control.
	control_finish: message type is Start-Control-Connection-Request(1).
Tunnel is 3, call is 0.
	control_finish: Peer requested tunnel 3 twice, ignoring second one.
	build_fdset: closing down tunnel 18015
	build_fdset: closing down tunnel 46540

	Connection 3 closed to MY_CLIENT_IP, port 1701 (Timeout)
	network_thread: select timeout
	network_thread: select timeout
	network_thread: select timeout
	network_thread: select timeout
	network_thread: select timeout
	Unable to deliver closing message for tunnel 46540. Destroying anyway.