[Openswan Users] 2.6.23 vs kernel 2.6.29 - ipsec not exit

[Szél Gábor]

sorry me that I write two times.

i use ipsec setup --showonly start / stop
and copy this output the bash script. If i use this script then ipsec 
starting normaly (ipsec setup --status not working)

Szél Gábor írta:
> Dear all,
>
> I have a problem, i want use openswan 2.6.23 on Ubuntu 9.04 X64 Server.
> I download openswan source, and make ipsec module (if i compille module, 
> and make ipsec programs, i use: export KLIPSCOMPILE="-m64 
> -mno-red-zones", export USER_COMPILE="-m64".
>
> If I start ipsec witch ipsec init.d script or ipsec command, ipsec 
> started and not quit. When i look syslog and other logs, ipsec starting 
> normaly. if i press ctrl-c ipsec runing.
>
> Oct  7 13:02:07 BeLa ipsec_setup: Starting Openswan IPsec 2.6.23...
> Oct  7 13:02:07 BeLa ipsec_setup: Using KLIPS/legacy stack
> Oct  7 13:02:07 BeLa ipsec_setup: KLIPS debug `none'
> Oct  7 13:02:07 BeLa ipsec_setup: KLIPS ipsec0 on eth0 
> x.x.x.x/255.255.255.192 broadcast x.x.x.x
> Oct  7 13:02:07 BeLa kernel: [ 1844.171555] 
> Oct  7 13:02:07 BeLa pluto: adjusting ipsec.d to /etc/ipsec.d
> Oct  7 13:02:07 BeLa ipsec_setup: ...Openswan IPsec started
> Oct  7 13:02:07 BeLa ipsec__plutorun: 002 added connection description 
> "xxx"
> Oct  7 13:02:07 BeLa ipsec__plutorun: 002 added connection description 
> "xxx"
> Oct  7 13:02:07 BeLa ipsec__plutorun: 002 added connection description 
> "xxx"
> Oct  7 13:02:07 BeLa ipsec__plutorun: 002 added connection description 
> "xxx"
> Oct  7 13:02:07 BeLa ipsec__plutorun: 002 added connection description 
> "xxx"
> Oct  7 13:02:07 BeLa ipsec__plutorun: 104 "xxx" #1: STATE_MAIN_I1: initiate
> Oct  7 13:02:07 BeLa ipsec__plutorun: 104 "xxx" #2: STATE_MAIN_I1: initiate
> Oct  7 13:02:07 BeLa ipsec__plutorun: 104 "xxx" #3: STATE_MAIN_I1: initiate
> Oct  7 13:02:07 BeLa ipsec__plutorun: 104 "xxx" #4: STATE_MAIN_I1: initiate
>
> ipsec auto --status output is normal
> and:
> # ipsec setup --status
> IPsec stopped
> but...
> has /var/run/pluto/ipsec.info file!
> An normal Pluto is active?
> some (5) eroutes exist!
>
> ipsec and pluto runing!
>
> i use ipsec with KLIPS
> # cat /etc/ipsec.conf
> version 2.0
> # ------------------------------------
> # basic configuration
> config setup
>     interfaces="ipsec0=eth0"
>     #plutoload=%search
>     #plutostart=%search
>     uniqueids=yes
>
>     # ------------------
>     nat_traversal=no
>     oe=off
>     protostack=klips
>     virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12
>    
>     # ---- logs -----
>    
>     # --- debug ------
>     plutodebug=all
>     klipsdebug=none
>     plutostderrlog=/tmp/pluto.log
>
> ....... (tunels config)
>
> if i change protostack to netkey, ipsec starting normaly,
>
> What is the problem ? if i on klips and pluto debug message, i dont show 
> critical errors.
>
> I test other kernel version, not working.
>
> ----
> regards
> Gábor Szél
>
> _______________________________________________
> Users at openswan.org
> http://lists.openswan.org/mailman/listinfo/users
> Building and Integrating Virtual Private Networks with Openswan: 
> http://www.amazon.com/gp/product/1904811256/104-3099591-2946327?n=283155
>   

-- 
üdv,
quash
Az oroszok már a spájzban vannak!