[Openswan Users] Openswan error messages

[Philip Bellino]

Hello,

When I start openswan-2.6.22, I get the 2 following errors:

Nov  3 10:38:42 ipsechost2 ipsec_setup: ...Openswan IPsec started
Nov  3 10:38:42 ipsechost2 ipsec__plutorun: opening file:
/etc/ipsec.conf
Nov  3 10:38:42 ipsechost2 ipsec__plutorun: 002 received whack
connection message

************************************************************************
******************
Nov  3 10:38:42 ipsechost2 ipsec__plutorun: 023 address family
inconsistency in this connection=2 host=2/nexthop=0
************************************************************************
********************

Nov  3 10:55:01 ipsechost2 ipsec_setup: ...Openswan IPsec started
Nov  3 10:55:01 ipsechost2 ipsec__plutorun: opening file:
/etc/ipsec.conf
Nov  3 10:55:01 ipsechost2 ipsec__plutorun: 002 received whack
connection message
Nov  3 10:55:01 ipsechost2 ipsec__plutorun: 002 added connection
description "testIKE"

************************************************************************
*********************
Nov  3 10:55:01 ipsechost2 ipsec__plutorun: 022 "testIKE": we cannot
identify ourselves with either end of this connection
************************************************************************
**********************

Has anyone seen these errors and if so, can you point me in the right
direction to solve them?

Below is my ipsec.conf file contents

config setup
        # Do not set debug options to debug configuration issues!
        # plutodebug / klipsdebug = "all", "none" or a combation from
below:
        # "raw crypt parsing emitting control klips pfkey natt x509 dpd
private"
        # eg:
        plutodebug="all"
       #
conn testIKE
                left=10.0.0.1
                leftsubnet=15.0.0.0/8
                leftnexthop=%defaultroute
                right=10.0.0.10
                rightsubnet=125.1.0.0/16
                rightnexthop=%defaultroute
                type=tunnel
                auto=start
                authby=secret

Thanks,
Phil Bellino

Phil Bellino
Software Engineer
MRV Communications, Inc.
295 Foster Street
Littleton, MA. 01460
Phone: 978-952-4807
Fax: 978-952-5444
Email: pbellino at mrv.com 
 <http://www.mrv.com/> 



-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openswan.org/pipermail/users/attachments/20091103/3a3e1886/attachment-0001.html