[Openswan Users] PSK connection problems

[Peter Smith]

> On Fri, 26 Jun 2009, Peter Smith wrote:
>
>> Is there any way that I can get xl2tpd to log more verbosely? The above
>> error doesn't seem to give any clues as to the problem (well not to my
>> untrained eye anyway)
>
> Yes, see man xl2tpd.conf.
> You can also enable a bunch more as compile time flags. See Makefile

I've turned the available debug options on (state, packet, etc), but
nothing from xl2tpd. The following output was captured during an attempt
to establish a VPN connection:

# xl2tpd -D
xl2tpd[20407]: setsockopt recvref: Protocol not available
xl2tpd[20407]: L2TP kernel support not detected.
xl2tpd[20407]: xl2tpd version xl2tpd-1.2.0 started on Solidox PID:20407
xl2tpd[20407]: Written by Mark Spencer, Copyright (C) 1998, Adtran, Inc.
xl2tpd[20407]: Forked by Scott Balmos and David Stipp, (C) 2001
xl2tpd[20407]: Inherited by Jeff McAdams, (C) 2002
xl2tpd[20407]: Forked again by Xelerance (www.xelerance.com) (C) 2006
xl2tpd[20407]: Listening on IP address 0.0.0.0, port 1701

I've also tried 'debug all' in /etc/ipsec.conf. Lots of debug information,
but I couldn't see anything of use in it.

Thanks,
Pete