[Openswan Users] _updown called with wrong PLUTO_VERB

[hiren joshi]

Hello,

When I manually make the following connection up (ipsec manual --up
manual_keying),
_updown script is being called with PLUTO_VERB="up-host" instead of
PLUTO_VERB="up-client".

config setup
        interfaces="ipsec0=eth1 "
        klipsdebug=none
        plutodebug="none"
        uniqueids=no
        nat_traversal=yes
        crlcheckinterval=3600
        nhelpers=0

conn %default
        leftupdown=/usr/lib/ipsec/_updown
        rightupdown=/usr/lib/ipsec/_updown

conn manual_keying
        leftsubnet=192.168.3.0/24
        rightsubnet=192.168.2.0/24
        type=tunnel
        left=172.16.3.2
        leftnexthop=172.16.3.1
        right=172.16.1.11
        spi=0x100
        leftespspi=0x1111
        rightespspi=0x2222
        esp=des
        leftespenckey=0x0123456789012345
        rightespenckey=0x9876543210987654

Any clue?

Thanks for your time.

Regards,
hiren
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openswan.org/pipermail/users/attachments/20090129/6230f4ed/attachment-0001.html