[Openswan Users] two subnets in leftside

[Ruben Laban]

On Wednesday 04 February 2009 at 22:30 (CET), Paul Wouters wrote:
> On Wed, 4 Feb 2009, Nick wrote:
> > I installed Linux Openswan U2.4.11/K2.4.9 (klips) for communication
> > between offices.Network diagram below:
> >
> > <192.168.100.0/22>
> >
> > <MY IPSec gateway>  --- internet ---  <cisco router> ---172.16.254.0/24
> >
> > <192.168.150.0/22>
> >
> >
> > Customers of the subnets 192.168.100.0/22 and 92.168.150.0/22 should
> > have access to the remote side. As specified in the settings leftsubnet?
>
> leftsubnets={192.168.100.0/22, 192.168.150.0/22}
> rightsubnet=172.16.254.0/24

This doesn't work for openswan 2.4.x. With 2.4.x you'll need to configure two 
conn sections, one for each leftsubnet.
-- 
Ruben