[Openswan Users] Openswan doesn't starts because pluto is down

[Jorge Jimenez]

Hi Paul,

Thanks for your quickly answer!
Sorry for my English...
I only see in my logs what I sended... How can I increase my logs? What can I do to help you to find the problem...

Thanks and kind regards


¡Feliz Navidad y Prospero 2010!

Jorge Jiménez Miguélez
Avinguda Diagonal, 605 - 4ª Planta
08028 - Barcelona
Tel.: 902 01 35 34 - Móvil: 669 83 08 76
http://www.pross.com


-----Mensaje original-----
De: Paul Wouters [mailto:paul at xelerance.com] 
Enviado el: miércoles, 23 de diciembre de 2009 20:01
Para: Jorge Jimenez
CC: users at openswan.org
Asunto: Re: [Openswan Users] Openswan doesn't starts because pluto is down

On Wed, 23 Dec 2009, Jorge Jimenez wrote:

> Date: Wed, 23 Dec 2009 17:14:59 +0100
> From: Jorge Jimenez <jorge.jimenez at pross.com>
> Cc: Jorge Jimenez <jorge.jimenez at pross.com>
> To: "users at openswan.org" <users at openswan.org>
> Subject: [Openswan Users] Openswan doesn't starts because pluto is down

> I’ve installed Openswan and it doesn’t work.

It looks like your pluto is crashing. Please check the logs for a more detailed
message. I don't see it below.

Paul

> My message log is:
> 
>  
> 
>                 Dec 23 18:14:28 pross-mon01 ipsec_setup: Stopping Openswan IPsec...
> 
> Dec 23 18:14:28 pross-mon01 kernel: NET: Unregistered protocol family 15
> 
> Dec 23 18:14:28 pross-mon01 ipsec_setup: ...Openswan IPsec stopped
> 
> Dec 23 18:14:32 pross-mon01 kernel: NET: Registered protocol family 15
> 
> Dec 23 18:14:32 pross-mon01 ipsec_setup: Starting Openswan IPsec U2.6.24rc3/K2.6.18-164.el5...
> 
> Dec 23 18:14:33 pross-mon01 ipsec_setup: Using NETKEY(XFRM) stack
> 
> Dec 23 18:14:33 pross-mon01 kernel: padlock: VIA PadLock not detected.
> 
> Dec 23 18:14:33 pross-mon01 kernel: padlock: VIA PadLock not detected.
> 
> Dec 23 18:14:33 pross-mon01 ipsec_setup: /usr/libexec/ipsec/addconn Non-fips mode set in
> /proc/sys/crypto/fips_enabled
> 
> Dec 23 18:14:33 pross-mon01 pluto: adjusting ipsec.d to /etc/ipsec.d
> 
> Dec 23 18:14:33 pross-mon01 ipsec__plutorun: adjusting ipsec.d to /etc/ipsec.d
> 
> Dec 23 18:14:33 pross-mon01 ipsec__plutorun: /usr/libexec/ipsec/addconn Non-fips mode set in
> /proc/sys/crypto/fips_enabled
> 
> Dec 23 18:14:33 pross-mon01 ipsec_setup: ...Openswan IPsec started
> 
> Dec 23 18:14:33 pross-mon01 ipsec__plutorun: /usr/libexec/ipsec/addconn Non-fips mode set in
> /proc/sys/crypto/fips_enabled
> 
> Dec 23 18:14:33 pross-mon01 ipsec_starter[19297]: connect(pluto_ctl) failed: No such file or directory
> 
> Dec 23 18:14:33 pross-mon01 ipsec__plutorun: /usr/libexec/ipsec/addconn Non-fips mode set in
> /proc/sys/crypto/fips_enabled
> 
> Dec 23 18:14:33 pross-mon01 ipsec__plutorun: connect(pluto_ctl) failed: No such file or directory
> 
> Dec 23 18:14:33 pross-mon01 ipsec__plutorun: whack: Pluto is not running (no "/var/run/pluto/pluto.ctl")
> 
> Dec 23 18:14:34 pross-mon01 last message repeated 2 times
> 
> Dec 23 18:14:34 pross-mon01 ipsec__plutorun: pluto apparently already running (?!?), giving up
> 
>  
> 
> And my ipsec.conf file is:
> 
>  
> 
>                 version 2.0
> 
>  
> 
> config setup
> 
>         # Debug-logging controls:
> 
>         protostack=netkey
> 
>         #klipsdebug=none
> 
>         klipsdebug="all"
> 
>         plutodebug="all"
> 
>         #plutodebug=none
> 
>         nat_traversal=yes
> 
> #       interfaces = "ipsec0=eth0"
> 
>  
> 
> conn iberobrico
> 
>         auto=start
> 
>         left=%defaultroute
> 
> #       leftprotoport=17/1701
> 
>         #leftsubnet=10.10.100.0/24
> 
>         right=xxx.xxx.xxx.xxx
> 
> #       rightprotoport=17/1701
> 
>         rightsubnet=172.254.100.0/24
> 
>         #rightid=%any
> 
>         keyexchange=ike
> 
>         authby=secret
> 
>         pfs=no
> 
>         rekey=yes
> 
>         keyingtries=0
> 
> #       type=transport
> 
>         esp=3des
> 
>         #auth=esp
> 
>         compress=yes
> 
>  
> 
> Can someone help me please.
> 
>  
> 
> Kind Regards
> 
>  
> 
> PROSS Nevado
> 
> ¡Feliz Navidad y Prospero 2010!
> 
>  
> 
> Jorge Jiménez Miguélez
> 
> Avinguda Diagonal, 605 - 4ª Planta
> 08028 - Barcelona
> 
> Tel.: 902 01 35 34 - Móvil: 669 83 08 76
> http://www.pross.com
> 
>  
> 
>  
> 
> 
>