[Openswan Users] Openswan doesn't starts because pluto is down

[Jorge Jimenez]

Hi,

I've installed Openswan and it doesn't work.
My message log is:

                Dec 23 18:14:28 pross-mon01 ipsec_setup: Stopping Openswan IPsec...
Dec 23 18:14:28 pross-mon01 kernel: NET: Unregistered protocol family 15
Dec 23 18:14:28 pross-mon01 ipsec_setup: ...Openswan IPsec stopped
Dec 23 18:14:32 pross-mon01 kernel: NET: Registered protocol family 15
Dec 23 18:14:32 pross-mon01 ipsec_setup: Starting Openswan IPsec U2.6.24rc3/K2.6.18-164.el5...
Dec 23 18:14:33 pross-mon01 ipsec_setup: Using NETKEY(XFRM) stack
Dec 23 18:14:33 pross-mon01 kernel: padlock: VIA PadLock not detected.
Dec 23 18:14:33 pross-mon01 kernel: padlock: VIA PadLock not detected.
Dec 23 18:14:33 pross-mon01 ipsec_setup: /usr/libexec/ipsec/addconn Non-fips mode set in /proc/sys/crypto/fips_enabled
Dec 23 18:14:33 pross-mon01 pluto: adjusting ipsec.d to /etc/ipsec.d
Dec 23 18:14:33 pross-mon01 ipsec__plutorun: adjusting ipsec.d to /etc/ipsec.d
Dec 23 18:14:33 pross-mon01 ipsec__plutorun: /usr/libexec/ipsec/addconn Non-fips mode set in /proc/sys/crypto/fips_enabled
Dec 23 18:14:33 pross-mon01 ipsec_setup: ...Openswan IPsec started
Dec 23 18:14:33 pross-mon01 ipsec__plutorun: /usr/libexec/ipsec/addconn Non-fips mode set in /proc/sys/crypto/fips_enabled
Dec 23 18:14:33 pross-mon01 ipsec_starter[19297]: connect(pluto_ctl) failed: No such file or directory
Dec 23 18:14:33 pross-mon01 ipsec__plutorun: /usr/libexec/ipsec/addconn Non-fips mode set in /proc/sys/crypto/fips_enabled
Dec 23 18:14:33 pross-mon01 ipsec__plutorun: connect(pluto_ctl) failed: No such file or directory
Dec 23 18:14:33 pross-mon01 ipsec__plutorun: whack: Pluto is not running (no "/var/run/pluto/pluto.ctl")
Dec 23 18:14:34 pross-mon01 last message repeated 2 times
Dec 23 18:14:34 pross-mon01 ipsec__plutorun: pluto apparently already running (?!?), giving up

And my ipsec.conf file is:

                version 2.0

config setup
        # Debug-logging controls:
        protostack=netkey
        #klipsdebug=none
        klipsdebug="all"
        plutodebug="all"
        #plutodebug=none
        nat_traversal=yes
#       interfaces = "ipsec0=eth0"

conn iberobrico
        auto=start
        left=%defaultroute
#       leftprotoport=17/1701
        #leftsubnet=10.10.100.0/24
        right=xxx.xxx.xxx.xxx
#       rightprotoport=17/1701
        rightsubnet=172.254.100.0/24
        #rightid=%any
        keyexchange=ike
        authby=secret
        pfs=no
        rekey=yes
        keyingtries=0
#       type=transport
        esp=3des
        #auth=esp
        compress=yes

Can someone help me please.

Kind Regards

[cid:image001.jpg at 01CA83F1.9B36D760]
¡Feliz Navidad y Prospero 2010!

Jorge Jiménez Miguélez
Avinguda Diagonal, 605 - 4ª Planta
08028 - Barcelona
Tel.: 902 01 35 34 - Móvil: 669 83 08 76
http://www.pross.com<http://www.pross.com/>


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openswan.org/pipermail/users/attachments/20091223/c7117522/attachment-0001.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 19285 bytes
Desc: image001.jpg
Url : http://lists.openswan.org/pipermail/users/attachments/20091223/c7117522/attachment-0001.jpg