[Openswan Users] Ipsec interfaces

[Jon James]

Just a question

During my testing of Openswan I had used a number of local ip addresses for
my tunnels

When I run ipsec auto -status

I get

 

using kernel interface: netkey

000 interface lo/lo ::1

000 interface lo/lo 127.0.0.1

000 interface lo/lo 127.0.0.1

000 interface eth0/eth0 192.168.1.145

000 interface eth0/eth0 192.168.1.145

000 interface eth0/eth0 1.2.3.2

000 interface eth0/eth0 1.2.3.2

000 interface eth0/eth0 1.80.0.2

000 interface eth0/eth0 1.80.0.2

000 interface eth0/eth0 1.80.3.250

000 interface eth0/eth0 1.80.3.250

000 interface eth0/eth0 1.80.0.3

000 interface eth0/eth0 1.80.0.3

000 interface ath0/ath0 192.168.10.1

000 interface ath0/ath0 192.168.10.1

000 %myid = (none)

 

How do I remove these old unused addresses such as 1.2.3.2 & 1.80.3.250?

Does it matter?

Thank you

 

Jon James

ClaimTools Solutions

(250)713-8185

1-888-989-8388

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openswan.org/pipermail/users/attachments/20090421/c8bf8ea3/attachment.html