[Openswan Users] Openswan site-to-site VPN not forwarding traffic down VPN tunnel

[Aaron Hicks]

Hi all,
Yup. Route back from the edge router worked.

Thanks,

Aaron.

2008/11/26 Paul Wouters <paul at xelerance.com>

> On Wed, 26 Nov 2008, Aaron Hicks wrote:
>
> > The Openswan VPN tunnel starts automatically at start up and attaches
> itself
> > to br0 (i.e. there is no ipsec0 interface), and  the bridge can ping
> servers
> > on the remote network. It seems to have valid routes to the remote
> network.
> > Unfortunatly I can't seem to get it to forward packets from other hosts
> on
> > our network to the remote network. Tracert shows that requests just head
> > straight to the edge router, and aren't being redirected by the bridge
> into
> > the ipsec tunnel.
>
> Indeed. a route from the edge router back to the bridge's IP address
> resolved this issue :)
>
> Paul
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openswan.org/pipermail/users/attachments/20081126/ac091418/attachment-0002.html