[Openswan Users] Some problem in connection establishment with AH

[PVG Ravi Kumar]

Hello friends

I am using openswan 2.4.13 with fedora core4 system.

 

I am facing some problem when I tried to establish tunnel with AH. Its
always taking SHA1 (default protocol) as AH auth protocol though I mention
md5

 

Here is my config file

conn Remote

            type=tunnel

            authby=secret

            left=%defaultroute

            leftid=10.1.1.253

            leftsubnet=192.168.200.173/24

            right=192.168.10.183

            rightid=10.1.1.254

            rightsubnet=192.168.100.183/24

            ike=des-md5-modp1536

            auth=ah

            ah=md5 

            ikelifetime=28800

            keylife=14400

            auto=add

 

It is working fine when I try with esp. 

 

Is there anything wrong with the config file or any extra option should be
added to make AH work proper? Please suggest what to do

 

 

 

Thanks

Ravi


 

DISCLAIMER: This message is proprietary to D-Link (India) Limited and is
intended solely for the use of the individual to whom it is addressed. It
may contain privileged or confidential information and should not be
circulated or used for any purpose other than for what it is intended. If
you have received this message in error, please notify the originator
immediately. If you are not the intended recipient, you are notified that
you are strictly prohibited from using, copying, altering, or disclosing the
contents of this message. D-Link (India) Limited accepts no responsibility
for loss or damage arising from the use of the information transmitted by
this email including damage from virus.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openswan.org/pipermail/users/attachments/20081121/7d0fbee3/attachment-0001.html