[Openswan Users] Host-to-host VPN creation after hard reboot

[Julien Bonjean]

Hi Paul,

Sorry about the terminology, you're right, it's server and client. I 
tried to set uniqueids=yes in config file but it didn't change anything, 
still the same behaviour.

Julien

Sorry about
Paul Wouters wrote:
> On Thu, 6 Nov 2008, Julien Bonjean wrote:
>
>   
>> I establish a host-to-host VPN (tunnel mode). Considering I have a master a a
>> slave. Master is booted first and slave make a boot on lan. Both server use
>> 2.4.13 version. On first slave boot, everything is fine, VPN is created. If
>> slave ipsec service is shutdown gently before reboot, VPN is well created on
>> next boot, but if a hard reboot is done on slave, VPN is not created and
>> master ipsec service has to be restarted to re-create VPN. What's the problem
>> and are there some workaround ? Thank you.
>>     
>
> Not sure if i understand "master" and "slave", but I assume for now you
> mean "server" and "client" (or responder and initiator)
>
> Do you have uniqueids=yes in config setup? That should override the
> old tunnel info and allow setting up the new one.
>
> Paul
>   


-- 
Julien Bonjean
Consultant en logiciel libre
Savoir-faire Linux
http://www.savoirfairelinux.com
Tel : (514) 276-5468 ext 139

-------------- next part --------------
A non-text attachment was scrubbed...
Name: julien_bonjean.vcf
Type: text/x-vcard
Size: 376 bytes
Desc: not available
Url : http://lists.openswan.org/pipermail/users/attachments/20081106/8cdd7bc4/attachment.vcf