[Openswan Users] need help about after tcpdump -n -i eth0

[yu chen]

hello,All
i made an ipsec tunnel and i got :
May  1 11:53:21 localhost pluto[7284]: "testipsec"#1: initiating Main Mode
May  1 11:53:21 localhost pluto[7284]: "testipsec"#1: ignoring unknown Vendor ID payload [166f932d55eb64d8e4df4fd37e2313f0d0fd84510000000000000000]
May  1 11:53:21 localhost pluto[7284]: "testipsec" #1: received Vendor ID payload [Dead Peer Detection]
May  1 11:53:21 localhost pluto[7284]: "testipsec" #1: ignoring Vendor ID payload [HeartBeat Notify 386b0100]
May  1 11:53:21 localhost pluto[7284]: "testipsec" #1: transition from state STATE_MAIN_I1 to state STATE_MAIN_I2
May  1 11:53:21 localhost pluto[7284]: "testipsec" #1: STATE_MAIN_I2: sent MI2, expecting MR2
May  1 11:53:21 localhost pluto[7284]: "testipsec" #1: I did not send a certificate because I do not have one.
May  1 11:53:21 localhost pluto[7284]: "testipsec"#1: transition from state STATE_MAIN_I2 to state STATE_MAIN_I3
May  1 11:53:21 localhost pluto[7284]: "testipsec" #1: STATE_MAIN_I3: sent MI3, expecting MR3
May  1 11:53:21 localhost pluto[7284]: "testipsec"#1: Main mode peer ID is ID_IPV4_ADDR: 'xxx.xxx.xxx.xxx'
May  1 11:53:21 localhost pluto[7284]: "testipsec"#1: transition from state STATE_MAIN_I3 to state STATE_MAIN_I4
May  1 11:53:21 localhost pluto[7284]: "testipsec"#1: STATE_MAIN_I4: ISAKMP SA established {auth=OAKLEY_PRESHARED_KEY cipher=oakley_3des_cbc_192 prf=oakley_md5 group=modp1024}
May  1 11:53:21 localhost pluto[7284]: "testipsec" #4: ignoring informational payload, type IPSEC_RESPONDER_LIFETIME
May  1 11:53:21 localhost pluto[7284]:"testipsec"#4: transition from state STATE_QUICK_I1 to state STATE_QUICK_I2
May  1 11:53:21 localhost pluto[7284]: "testipsec" #4: STATE_QUICK_I2: sent QI2, IPsec SA established {ESP=>0x871a36e3 <0xa8b46b75 xfrm=3DES_0-HMAC_MD5 NATD=none DPD=none}
May  1 11:55:49 localhost pluto[7284]:"testipsec"deleting connection
May  1 11:55:49 localhost pluto[7284]: "testipsec" #4: deleting state (STATE_QUICK_I2)
May  1 11:55:49 localhost pluto[7284]: "testipsec"#1: deleting state (STATE_MAIN_I4)

it means i've successfully set up ipsec tunnel?
if yes. but why i can not get ESP messages when i am using tcpdump -n -i eth0?
thank you very much
Keith Chen


      ____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openswan.org/pipermail/users/attachments/20080502/df0fae44/attachment-0001.html