[Openswan Users] how to connect openswan to broadband---full detail !!!

[Nirmala Balu]

hello sir,
I brought broadband connection with static addresses for testing vpn only.
I understand from your answer hat to give left as "192.168.1.102" and right
as "192.168.1.2" .sir,these are local addresses behind the  modem only
no????
In "Ipsec.conf" file,left and right can be local addresses(not static-not
unique address)???
Where the static addresses(59.90.235.34,59.90.235.36) can be used in
"ipsec.conf" file???

Thanking You,
regards,
NIrmala


On 7/1/08, Paul Wouters <paul at xelerance.com> wrote:
>
> On Tue, 1 Jul 2008, Nirmala Balu wrote:
>
> >    (1)openswan gateway1--192.168.1.102
> >    (2)modem 1 internal ip address----192.168.1.1
> >    (3)modem 1 external(static)ip address----59.90.235.34
> >    (4)modem 2 external(static)ip address----59.90.235.36
> >    (5)modem 2 internal ip address----192.168.1.1
> >    (6)openswan gateway 2--192.168.1.2
>
> You cannot use 192.168.1.0/24 on all locations.
>
> >    It will helpful for me if anyone tell me how to configure ((for
> >    example)which ip address to give in "left" and "right" in
> ipsec.conf?)and
>
> left is the leftside of your paper diagram, right is the right side. You
> pick!
> People tend to use left as local and right as remote.
>
> Paul
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openswan.org/pipermail/users/attachments/20080701/db7f77d8/attachment.html