[Openswan Users] Transmitting data between endpoints

[Rob Emanuele]

Thanks for the information Peter but I'm still out of luck.  I'm trying
to talk to a ipsec/l2tp server as set up according to:

http://www.jacco2.dds.nl/networking/openswan-l2tp.html

with a client:

http://www.jacco2.dds.nl/networking/linux-l2tp.html

I'm reluctant to modify the server as it works great for windows clients
trying to talk to its network.  No matter what I try.  l2tp traffic or
any other traffic will not pass over the tunnel.

Any other thoughts?


On Thu, 2008-01-31 at 15:08 -0500, Peter McGill wrote:
> Add the following to your conns... (New method)
> 	leftsourceip=<local lan ip>
> 	rightsourceip=<remote lan ip>
> 
> Or add additional conns without leftsubnet and rightsubnet,
> or leftsubnet=left and rightsubnet=right. (Old method)
> 
> Peter McGill
>  
> 
> > -----Original Message-----
> > From: users-bounces at openswan.org 
> > [mailto:users-bounces at openswan.org] On Behalf Of Rob Emanuele
> > Sent: January 31, 2008 1:30 PM
> > To: users at openswan.org
> > Subject: [Openswan Users] Transmitting data between endpoints
> > 
> > I've gotten a few ipsec tunnels set up between linux machines.  They
> > work great for routing packets between networks but not between the
> > gateway endpoints.
> > 
> > A  <------> E1 <-------> E2 <---------> B
> > 
> > A can talk to B but E1 and E2 cannot talk to each other.  In one case
> > I'm trying to set up l2tp but without the endpoints being 
> > about to talk
> > to each other they can't send the l2 packets over the tunnel.
> > 
> > All machines are running openswan.  E1 is kernel-2.6.17 with
> > openswan-2.4.6 and E2 is kernel-2.6.20 with openswan-2.4.4.
> > 
> > Thanks for any help,
> > 
> > Rob
> > 
> > 
> > _______________________________________________
> > Users at openswan.org
> > http://lists.openswan.org/mailman/listinfo/users
> > Building and Integrating Virtual Private Networks with Openswan: 
> > http://www.amazon.com/gp/product/1904811256/104-3099591-294632
> > 7?n=283155