[Openswan Users] Openswan-2.6.14 Step by step install procedure

[Sunil Bhandarkar]

Dear Paul,

I want to install Openswan-2.6.14 software on Oracle linux enterprise
server  using PPtp for roaming users
It would be great if you can give the step by step installation process for
doing the same.


I am gettind stuck when i do ipsec verify



[root at vpnt etc]# ipsec verify
Checking your system to see if IPsec got installed and started correctly:
Version check and ipsec on-path                                 [OK]
Linux Openswan U2.6.14/K2.6.18-8.el5xen (netkey)
Checking for IPsec support in kernel                            [OK]
Testing against enforced SElinux mode                           [OK]
NETKEY detected, testing for disabled ICMP send_redirects       [FAILED]

  Please disable /proc/sys/net/ipv4/conf/*/send_redirects
  or NETKEY will cause the sending of bogus ICMP redirects!

NETKEY detected, testing for disabled ICMP accept_redirects     [FAILED]

  Please disable /proc/sys/net/ipv4/conf/*/accept_redirects
  or NETKEY will accept bogus ICMP redirects!

Checking for RSA private key (/etc/ipsec.secrets)               [OK]
Checking that pluto is running                                  [OK]
Two or more interfaces found, checking IP forwarding            [FAILED]
Checking for 'ip' command                                       [OK]
Checking for 'iptables' command                                 [OK]

Opportunistic Encryption DNS checks:
   Looking for TXT in forward dns zone: vpnt.linux.com
        [MISSING]
   Does the machine have at least one non-private address?      [FAILED]





ifconfig for the same.



eth0      Link encap:Ethernet  HWaddr 00:0D:60:6E:9E:E4
          inet addr:172.16.10.112  Bcast:172.16.10.255  Mask:255.255.255.0
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Interrupt:19

eth1      Link encap:Ethernet  HWaddr 00:05:5D:4A:5E:7A
          inet addr:202.60.128.215  Bcast:202.60.128.255  Mask:255.255.255.0
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Interrupt:20 Base address:0xc000

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:5965 errors:0 dropped:0 overruns:0 frame:0
          TX packets:5965 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:8102452 (7.7 MiB)  TX bytes:8102452 (7.7 MiB)



Regards

Sunil
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openswan.org/pipermail/users/attachments/20080802/544b7ba9/attachment-0001.html